WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Y-Type Strainer, Grooved Ends, FIG.F0522-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assures accurate screen alignment Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Grooved Connections are cut in accordance with AWWA C 606 or other standard Groove Specifications for Steel Pipe.
- Rated Working Pressure 175 psi.
- UL 321 / ULC Listed.
WEFLO Dry-Barrel Fire Hydrant FIG.F0733-250
Specifications:
Meet or Exceed the Requirements of AWWA C502 Standard.
NFPA1963 Standard Nozzle Threads.
Traffic Feature with Duplex Stainless Steel Safety Stem Coupling, Excellent Flow Characteristics.
Multiple Nozzle Configurations.
Mechanical Joint Base Elbow.
Dry Top Design with O-ring Sealed Oil Reservoir.
Dual Auto-frost Bronze Drain Valves as Standard
UL246 Listed and FM 1510 Approved. Rated Working Pressure 250 psi. Certified to NSF/ANSI61&372
WEFLO Backflow Preventers – Reduced Pressure Zone Device FIG.F5400
PRODUCT FEATURES :
- A reduced pressure zone device is a testable device designed for use in 'high hazard' conditions to prevent backflow caused by back-siphonage or backpressure. It is intended for use under continuous pressure conditions.
- Multiple Ends Types: Flange by Flange, Flange by Groove, Groove by Groove.
- Pressure Rating:175psi/12bar
- Working Temperature : Cold Water, not exceeding 60°C
- Horizontal only.
- UL/ULC Listed.
WEFLO Adjustable Vertical Indicator Post FIG.F0800-IP
Specifications :
- Meet or Exceed the Requirements of NFPA 24 Standard.
- Indicates the State of the Valve OPEN or SHUT Position.
- Target Nut to allow 13 to 45 Turns.
- "L" Shaped Wrench Handle fitted with a Secure Padlock(provided by user).
- Protected Windows.
- Telescoping Operating Rod.
- Easily Adjustable indicator OPEN and SHUT Targets.
- UL/ULC 789 Listed and FM1110 Approved.
- CNBOP Certified.
WEFLO Platform Fire Hydrant U246C
Specifications :
Meet or Exceed the Requirements of UL 246C Standard.
NFPA 1963 Standard Nozzle Threads.
Bronze Body and Hose Nozzle.
0-ring Sealed Stem Nut and Hose Nozzle.
Excellent Flow Characteristics.
Multiple Nozzle Configurations.
Monitor Style available.
UL246C Listed, FM Approved.
250 psi Maximum Working Pressure.
WEFLO Vane-Type Waterflow Detector GIF.F6001S
Features :
- Equipped with tamper resistant screws to prevent unauthorized entry.
- The F6001S fits 1", 1%",1%", and 2" brass and copper threaded tees, in addition to 1 "and 1½" CPVC tees.
- Clearly marked plastic paddles are included to fit the different installation configurations.
- One switch is enclosed in the detector.
- Terminals are easy to read and wire.
- Designed and built for accuracy and repeatability.
- Rated Working Pressure: 300 psi.
- Flow Sensitivity Range for Signal: 15-37.8 L/min (4-10GPM)
- Contact Ratings: 8Aat125/250VAC, 3Aat 24VDC.
- Maximum Surge: 18 FPS (5.5m/s)
- UL/ULC Listed
- EAC and CE Certified.
WEFLO Vane-Type Waterflow Detector FIG.6001
Specifications:
Equipped with tamper resistant screws to prevent unauthorized entry.
Two synchronized switches are enclosed in a durable terminal block.
Terminals are easy to read and wire.
Built-In mechanical time delay feature: minimizing the risk of false alarms due to pressure surges or air trapped in the system. Offers excellent performance during riser vibrations caused by large in-rushes of water.
Designed and built for accuracy and repeatability. Flow sensitivity range UL/FM:4-10 GPM(15-38 LPM)CE:30-57L/min Contact rating L/FM:8Aat250VAc,3Aat24VDc.2.5Aat 30VDCCE:8Aat 125250VAC.3Aat24VDC
Reviews
There are no reviews yet.