WEFLO Pressure Switch FIG.WPS
Features
Maximum Adjustment Pressure Range:WPS10-1/WPS10-2:4-20 psi.
WPS40-1/WPS40-2:10-100 psi.
WPS120-1/WPS120-2:10-200psi.
Factory Setting:
WPS10-1.WPS10-2: 4-8 psi.
WPS40-1:operates at decreasing pressure at 30 psi.
WPS40-2: operates at increasing pressure at 50 psi and decreasing pressure 30 psi.
WPS120-1:operates at decreasing pressure at 110 psi.
WPS120-2: operates at increasing pressure at 130 psi and decreasing pressure 110 psi
Approximate Differential:
WPS10-1/WPS10-2:3 psi throughout range.WPS40-1/WPS40-2:3 psi@ 10 psi& 6psi @ 100 psi.
WPS120-1/WPS120-2:3 psi@ 10 psi& 9 psi @ 200 psi.
Contact Rating:10A@1251250VAC,2.5A@ 30VDCIP 66.
UL/ULC Listed, FM Approved, CE, EAC, VdS, LPCB, 3C certified.
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Water Motor and Gong, FIG.WMA-16
Operation :
When a Deluge Valve is activated, water flows through the valve's trim, discharges to a strainer and into the water motor inlet, From the inlet, the water flows through a nozzle which directs the stream to the impeller. The stream turns the Impeller and drive shaft, causing the striker arm to rotate, thus producing a continuous alarm. The water is discharged thro-ugh a 1"(25mm) drain outlet at the bottom of the impeller ho-using. The discharged water must be piped through the wall to a suitable open drain.
WEFLO Dry-Barrel Fire Hydrant FIG.F0733-250
Specifications:
Meet or Exceed the Requirements of AWWA C502 Standard.
NFPA1963 Standard Nozzle Threads.
Traffic Feature with Duplex Stainless Steel Safety Stem Coupling, Excellent Flow Characteristics.
Multiple Nozzle Configurations.
Mechanical Joint Base Elbow.
Dry Top Design with O-ring Sealed Oil Reservoir.
Dual Auto-frost Bronze Drain Valves as Standard
UL246 Listed and FM 1510 Approved. Rated Working Pressure 250 psi. Certified to NSF/ANSI61&372
WEFLO Basket Strainer, Flanged Ends FIG.F1411-250
Specification :
- Meet or exceed the requirements of UL 321 standard.
- 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
- Rated Working Pressure 250 psi.
- UL321/ULC listed.
WEFLO Wet-Barrel Fire Hydrant FIG.F1311 F1311B-250
Specifications :
- Meet or Exceed the Requirements of AWWA C503 Standard.
- NFPA1963 Standard Nozzle Threads.
- Excellent Flow Characteristics.
- Multiple Nozzle Configurations.
- Inlet Flange to ASTM B16.1 Class 125, size 6in.
- Rated Working Pressure 250 psi.
- UL246 Listed and FM 1511 Approved.
- NSF/ANSI61&372 certified forF1311B-250 Fire Hydrant.
WEFLO Backflow Prevention Devices SCV – SCDA – DCV
Description :
A single check valve is designed for use in “low hazard" conditions in services to prevent backflow caused by back-siphonage or back-pressure.
It is intended for use under continuous pressure conditions.
The check is designed to maintain a minimum of 1 psi across the check valve during normal operation.
Multiple Ends Types: Flange by Flange, Flange by Groove, Groove by Groove.
WEFLO Pressure Switch with Retard-FIG.WPSR
Features :
- Equipped with tamper resistant screws to prevent unauthorized entry.
- Built-in mechanical time delay feature to prevent false alarms due to water pressure variation.
- Enclosure: Cover: Die cast, Aluminum Alloy, ASTM B 85 A04130 Finish: Red powder coat Base: Die cast, Aluminum Alloy, ASTM B 85 A04130 All parts have corrosion resistant finishes.
- Maximum Pressure: 300psi
- Pressure Range: 5-8 psi(0.3-0.55bar)on rising pressure
- Contact Rating: Two sets of SPDT; 10A@ 125/250 VAC, 3A @ 24VDC
- Pressure Connection: 1/2”male NPT
- Operating Temperature Range:- 40'C to 60'C
- Conduit Entrances: one knockouts and one hole for 1/2" conduit provided
- Weight:0.8kg
- UL Listed, FM Approved, EAC and CE Certified
WEFLO Vane-Type Waterflow Detector GIF.F6001S
Features :
- Equipped with tamper resistant screws to prevent unauthorized entry.
- The F6001S fits 1", 1%",1%", and 2" brass and copper threaded tees, in addition to 1 "and 1½" CPVC tees.
- Clearly marked plastic paddles are included to fit the different installation configurations.
- One switch is enclosed in the detector.
- Terminals are easy to read and wire.
- Designed and built for accuracy and repeatability.
- Rated Working Pressure: 300 psi.
- Flow Sensitivity Range for Signal: 15-37.8 L/min (4-10GPM)
- Contact Ratings: 8Aat125/250VAC, 3Aat 24VDC.
- Maximum Surge: 18 FPS (5.5m/s)
- UL/ULC Listed
- EAC and CE Certified.
WEFLO Underground Fire Hydrant FIG.F9207
Specifications :
- Meet or Exceed the Requirements of BS EN 14339 Standard.
- Ductile iron Construction.
- 2 1/2 " London Round Thread Outlet to BS 750.
- Corrosion Resistant Construction, Compliant with BS EN 1074-6 for Disinfection Products.
- Universal Drilled Inlet Flange BS EN 1092-2, BS 10 Table D/E
- Auto-frost Drain Valve as Standard.
- Excellent Flow Characteristics.
- Multiple Outlets Configurations.
- Rated Working Pressure 16 bar.
- WRAS Approved.
Reviews
There are no reviews yet.