WEFLO Lug Butterfly Valve FIG.2502A(2503A-2504A)
Specification :
- Meet or exceed the requirements of EN 593, AS 4795.1 and MSS SP-67
- Light Weight Design Type.
- Replaceable Liner.
- 2 Shafts Design.
- Mounting Flange in accordance with ISO 5211 or MSS SP-102
- Connection Flanged Ends: PN10/16, Class 125 and Table D/E.
- Rated Working Pressure 16 bar / 250 psi.
- WRAS Approved.
Description
Reviews (0)
Be the first to review “WEFLO Lug Butterfly Valve FIG.2502A(2503A-2504A)” Cancel reply
Shipping & Delivery
Related products
WEFLO C515 NRS Resilient Seated Gate Valve 14“-24” FIG.F1211-300
Specifications :
Multiple End TypesF1211-300:Flange by FlangeF0213-300:Flange by MJF0233-300:MJ by MJ
Meet or exceed the requirements of AWWA C515 Standard.
Full Waterway.
Triple O-Ring Stem Seal.
Ductile-Iron Wedge, EPDM Encapsulated.
Operated with handwheel or operating nut.
Flanged to ASME B16.1 Class 125.
Other Flange Types available upon request. Mechanical Joint Outlets comply withANSIAWWAC153/A21.53Rated Working Pressure: 300 psi.
UL/ULC Listed and FM Approved.
WEFLO Pressure Relief Valve FL x FL Ends-FIG.F1319
Specifications:
Relief Valve: Limits inlet pressure by relieving excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
*Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range: 65-300psi.
Quick opening and adjustable closing speed.
Flanged to EN 1092-2 PN16,ANSIClass125/150/250.
(Other available on request)Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
WEFLO Pressure Relief Valve Gr x Gr Ends FIG.F1319
Specifications
Relief Valve: Limits inlet pressure by relieving excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising to a maximum valve.
Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range: 65-300psi.
Quick opening and adjustable closing speed.
*Grooved Ends to AWWA C606 Standard.
Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299
Specifications:
Ductile-Iron Wedge, EPDM Encapsulated.
Triple O-Ring Stem Seal.
Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3.
Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard.
UL/ULC Listed/FM Approved @ 300 psi rating
3C Certified.
WEFLO Swing Check Valve, Flanged Ends FIG.F1322
Specifications
Meet or exceed the requirements of AWWA C508 Standard.
Full Waterway.
Disc is fully encapsulated with EPDM rubber.
Superior design featuring exceptionally low pressure losses at high flow rates.
Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts. Face to face dimensions according to ASME B16.10.Flanged to ASME B16.1 Class 125,EN 1092-2 PN16.Other flange types are available on request. Rated Working Pressure: 350 psi. UL/ULC Listed and FM Approved.
ANSI/NSF61&372 Certified.
WEFLO Angle Fire Pump Relief Valve FL x FL Ends FIG.F1339
Specifications :
- Flanged to EN 1092-3 PN 16, ANSI Class 150/300. (Other available on request)
- Opens quickly: maintains pressure within close limits.
- Wide range adjustable: 65 psi-300 psi (4.5 bar - 21 bar).
- Pilot operated main valve.
- Reduced cavitation design.
- Simple field adjustable pressure setting, requiring no special tools or system down time.
- Limits maximum pump discharge pressure.
- Factory tested & preset to requirements.
- Applicable for water, sea water & foam.
- 300psi (21bar) high Working Pressure 600 psi (42bar) Hydrostatic Test
- Closes gradually for surge-free operation.
- UL 1478 Listed and FM 1361 Approved.
WEFLO Double Orifice Air Relief Valve FIG.9106
Specifications
Dual air release vents the accumulated small volumes of air during normal system operation.
Allows inflow of large volumes of air during draining of the pipeline.
Allows venting of large volumes of air during filling of the pipeline.
Provides protection from pipeline collapse due to vacuum.
Flange and drilling to ANSI B16.1 Class125.(Other flange types available upon request)
Rated Working Pressure 300 psi.
.UL Listed.
Reviews
There are no reviews yet.