Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702-2.jpg
Click to enlarge
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702-2.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8701.jpg
WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701
Back to products
EN593-Double-Eccentric-Butterfly-Valve-FIG2105-2106-2110.jpg
WEFLO EN593 Double Eccentric Butterfly Valve FIG.2105 - 2106 - 2110

WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8702

Description

Specifications :

  • With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
  • High working pressure, anti-burst and good elasticity.
  • To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
  • Malleable iron fittings with Zinc plated, NPT or BSPT thread.
  • EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils, Excellent resistance to sunlight, Good for high and low temperature applications.
  • NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
  • Neoprene suitable for water, sewage. oxidant and non-aromatic hydrocarbons.
  • Good for oil resistance and weathering
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8702”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Pressure-Gauges.jpg

WEFLO Pressure Gauges

,
Material Specifications :
  • Bourdon Tube Material: Copper Alloy C-type
  • Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
  • Movement Copper Alloy
  • Dial White Aluminum with Stop Pin; Black and Red Lettering.
  • Pointer ABS, Black Finish
  • Case Black Polycarbonate
  • Window Snap-in Clear Polycarbonate
  • Approvals UL Listed (UL-393) FM Approved
  • Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
Read more
Explosion-Proof-Vane-Type-Waterflow-Detector-FIGF6001EX.jpg

WEFLO Explosion-Proof Vane-Type Waterflow Detector FIG.F6001EX

Specifications :
  • Designed and approved to operate in hazardous locations.
  • Two synchronized switches are enclosed outside of explosion environment.
  • Terminals are easy to read and wire.
  • Built-In mechanical time delay feature; minimizing the risk of false alarms due to pressure surges or air trapped in the system.
  • Offers excellent performance during riser vibrations caused by large in-rushes of water.
  • Designed and built for accuracy and repeatability.
  • Hazardous Atmosphere Classification: Class I: Div. 1. Groups C, D T6; Class I: Div.2,Groups C,D T6; Class II: Div.1,Groups E,FG T6; Class II: Div.2,Groups F GT6: Class III. DNV 22 ATEX 17663X; IECEx DNV 22.0041X; Ex db lB T6 Gb; Ex tb llC T8O'c Db Ip66
  • Maximum pressure:
UL/ FM: 300 psi CE: 16 bar
  •  Flow sensitivity range
UL/ FM:4-10 GPM  (15-38 LPM)
  • Contact rating
8A at 250 VAC, 2.5A at 30VDC
  • Maximum Surge: 18FPS (5.5m/s)
  • Entry Size: 1/2"NPT threaded conduit connections
  • NEMA 4/ P66 Rated enclosure rating
  • Ambient Temperature: 0'C to 49C
Read more
Automatic-Sprinklers-3.jpg
Automatic-Sprinklers-2.jpg

WEFLO Automatic Sprinklers

,
Specifications: Style: Pendent, Upright, Sidewall Minimum Operating Pressure: 7 psi(0.5 bar)Maximum Working Pressure:175 psi(12 bar) Factory tested hydrostatically to 500 psi(34.5 bar) Thread Size: ½" NPT,  15 mm BSPT Nominal K-Factor: 5.6 U.S.(80.6 metric*) Overall Length: 2-3/8”(60 mm) Finish : Brass, Chrome Plated and White Polyester Available Metric K-factor measurement shown is in Bar. When pressure is measured in kPa. divide the metric K-factor shown by 10.0.
Read more
Backflow-Preventers-Double-Check-Valve-FIGF5410.jpg

WEFLO Backflow Preventers – Double Check Valve FIG.F5410

,
PRODUCT FEATURES :
  • A double check valve is a testable device designed for use in 'medium hazard conditions to prevent backflow caused by back-siphonage or back-pressure. It is intended for use under continuous pressure conditions. The DCV have two check modules.
  • Multiple Ends Types: Flange by Flange, Flange by Groove, Groove by Groove.
  • Pressure Rating:175psi/12bar
  • Working Temperature: Cold Water, not exceeding 60°C.
  • Horizontal only. UL/ ULC Listed.
Read more
Underground-Fire-Hydrant-FIGF9207.jpg
Underground-Fire-Hydrant-FIGF9207-2.jpg

WEFLO Underground Fire Hydrant FIG.F9207

Specifications :
  • Meet or Exceed the Requirements of BS EN 14339 Standard.
  • Ductile iron Construction.
  • 2  1/2 " London Round Thread Outlet to BS 750.
  • Corrosion Resistant Construction, Compliant with BS EN 1074-6 for Disinfection Products.
  • Universal Drilled Inlet Flange BS EN 1092-2, BS 10 Table D/E
  • Auto-frost Drain Valve as Standard.
  • Excellent Flow Characteristics.
  • Multiple Outlets Configurations.
  • Rated Working Pressure 16 bar.
  • WRAS Approved.
Read more
Platform-Fire-Hydrant-U246C.jpg
Platform-Fire-Hydrant-U246C-2.jpg

WEFLO Platform Fire Hydrant U246C

Specifications : Meet or Exceed the Requirements of UL 246C Standard. NFPA 1963 Standard Nozzle Threads. Bronze Body and Hose Nozzle. 0-ring Sealed Stem Nut and Hose Nozzle. Excellent Flow Characteristics. Multiple Nozzle Configurations. Monitor Style available. UL246C Listed, FM Approved. 250 psi Maximum Working Pressure.
Read more
Water-Motor-and-GongFIGWMA-16.jpg
Water-Motor-and-GongFIGWMA-16-2.jpg

WEFLO Water Motor and Gong, FIG.WMA-16

Operation : When a Deluge Valve is activated, water flows through the valve's  trim, discharges to a strainer and into the water motor inlet, From the inlet, the water flows through a nozzle which directs the stream to the impeller. The stream turns the Impeller and drive shaft, causing the striker arm to rotate, thus producing a continuous alarm. The water is discharged thro-ugh a 1"(25mm) drain outlet at the bottom of the impeller  ho-using. The discharged water must be piped through the wall to a suitable open drain.
Read more
Basket-Strainer-Flanged-Ends-FIGF1411-250.jpg

WEFLO Basket Strainer, Flanged Ends FIG.F1411-250

,
Specification :
  • Meet or exceed the requirements of UL 321 standard.
  • 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
  • Recessed seat in body assures accurate screen alignment.
  • Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
  • Rated Working Pressure 250 psi.
  • UL321/ULC listed.
Read more