WEFLO Double Orifice Air Relief Valve FIG.9101A
Specifications :
- Dual air release vent the accumulated small volumes of air during normal system operation.
- Allow inflow of large volumes of air during draining of the pipeline.
- Allow venting of large volumes of air during filling of the pipeline.
- Provide protection from pipeline collapse due to vacuum.
- Flange and drilling complies with EN 1092-2 PN 16. (Other types are available on request)
- Rated Working Pressure 16 bar/250 psi.
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO C509 OS&Y Resilient Seated Gate Valve,FL x PO Ends & PO x PO Ends FIG.F1711-300
Specifications :
Meet or exceed the requirements of AWWA C509 Standard.
Full Waterway.
Robust Design.
Adjustable Packing
Rubber Fully Encapsulated Ductile iron Wedge.
Handwheel-open left or open right.
Face to Face Dimension complies with ASME B16.10.Flange and Drilling comply with ASTM B16.1 Class 125Push-on Joints Outlet complies with ANS!/AWWAC110/A21.10 Standard.
Rated Working Pressure: 300 psi.
WEFLO Pressure Relief Valve FL x Gr Ends FIG.F1319
Specifications:
Relief Valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents pipe line pressure from rising to a maximum valve.
Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range:65-300psi.
Quick opening and adjustable closing speed. Flanged to EN 1092-2 PN16,ANSlClass125/150/250.(Other available on request)
e Grooved Ends to AWWA C606 Standard.
*Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
WEFLO Angle Fire Pump Relief Valve FL x FL Ends FIG.F1339
Specifications :
- Flanged to EN 1092-3 PN 16, ANSI Class 150/300. (Other available on request)
- Opens quickly: maintains pressure within close limits.
- Wide range adjustable: 65 psi-300 psi (4.5 bar - 21 bar).
- Pilot operated main valve.
- Reduced cavitation design.
- Simple field adjustable pressure setting, requiring no special tools or system down time.
- Limits maximum pump discharge pressure.
- Factory tested & preset to requirements.
- Applicable for water, sea water & foam.
- 300psi (21bar) high Working Pressure 600 psi (42bar) Hydrostatic Test
- Closes gradually for surge-free operation.
- UL 1478 Listed and FM 1361 Approved.
WEFLO Double Orifice Air Relief Valve FIG.9106
Specifications
Dual air release vents the accumulated small volumes of air during normal system operation.
Allows inflow of large volumes of air during draining of the pipeline.
Allows venting of large volumes of air during filling of the pipeline.
Provides protection from pipeline collapse due to vacuum.
Flange and drilling to ANSI B16.1 Class125.(Other flange types available upon request)
Rated Working Pressure 300 psi.
.UL Listed.
WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299
Specifications:
Ductile-Iron Wedge, EPDM Encapsulated.
Triple O-Ring Stem Seal.
Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3.
Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard.
UL/ULC Listed/FM Approved @ 300 psi rating
3C Certified.
WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318
Specifications :
Reducing Valve: Reduces a higher inlet pressure to a lower out.
let pressure.
Constant Outlet Pressure over Wide Flow Range.
Pilot-operated main valve not subject to pressure fall off..
Outlet Pressure is adjustable with single screw.
Adjustable Opening/Response Speed.
Stabilized regulation at near-zero flow.
Flanged Ends to EN1092-2PN16,ANSI Class125/150/250.
(Other available on request)
UL1739 listed.
3C Certified.
Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
Reviews
There are no reviews yet.