WEFLO Basket Strainer Flanged Ends, FIG.F1411-200
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- 3″ and above sizes are with Lifting Eyebolt.
- Connection Ends: ASME B16.1 Class 125 or EN 1092-2PN10/16 (Other Flange Types Available Upon Request)
- Rated Working Pressure 200 psi.
- UL 321/ULC Listed.
Description
Reviews (0)
Be the first to review “WEFLO Basket Strainer Flanged Ends, FIG.F1411-200” Cancel reply
Shipping & Delivery
Related products
WEFLO H-Strainer Fig.7120
Specifications :
- Large Flow Area, Low Pressure Drop.
- Service without removal from line.
- Can be installed in any position, spec installation with cover up is recommended.
- Flanged and Drilling comply with EN1092-2 PN16. Other flange types are available upon request.
- Rated Working Pressure 200 psi/16 bar.
WEFLO Basket Strainer FIG.7105 – 7108
Specifications :
- NPT or BSPT blowoff outlet on body. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Flanged and Drilling complies with EN 1092-2 PN 16/25, ANSI B 16.1 Class 125 or ANSI B1 6.2 Class 250.
- Rated Working Pressure
- Fig. 7105 : 16 bar for DN50 to DN 600Fig. 7108 :25 bar for DN 50 to Dn300.
- FIG: 7105 Certificated to ANSI/ NSF 61 & 372
WEFLO Flexible Coupling FIG.8602
NIBCO 45° Wye C x C x C – Cast-FIG No-749
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO Pressure Gauges
Material Specifications :
- Bourdon Tube Material: Copper Alloy C-type
- Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
- Movement Copper Alloy
- Dial White Aluminum with Stop Pin; Black and Red Lettering.
- Pointer ABS, Black Finish
- Case Black Polycarbonate
- Window Snap-in Clear Polycarbonate
- Approvals UL Listed (UL-393) FM Approved
- Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
NIBCO 45° Fitting Elbow Ftg x C – Wrot-FIG No-606-2
WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Malleable iron fittings with Zinc plated, NPT or BSPT thread.
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids.
- Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
Reviews
There are no reviews yet.