WEFLO Ball Check Valve FIG.5109 – 5709
Specifications :
- Face to face dimensions to EN558-1 basic series 48 & DIN3202 F6series.
- Fully rubber coated ball.
- Functions even at a low pressure
- Free low passage, blockage-free.
- Low frictional losses.
- For sewage prone to blockages.
- Flanged and drilling complies with EN 1092-2 PN10 /16; ANSI B 16.1 Class125.
- With NPT or BSPT Thread Ends.
- Rated Working Pressure 16 bar, 250 psi.
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Swing Check Valve, Flanged Ends FIG.F1322
Specifications
Meet or exceed the requirements of AWWA C508 Standard.
Full Waterway.
Disc is fully encapsulated with EPDM rubber.
Superior design featuring exceptionally low pressure losses at high flow rates.
Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts. Face to face dimensions according to ASME B16.10.Flanged to ASME B16.1 Class 125,EN 1092-2 PN16.Other flange types are available on request. Rated Working Pressure: 350 psi. UL/ULC Listed and FM Approved.
ANSI/NSF61&372 Certified.
WEFLO Double Orifice Air Relief Valve FIG.9106
Specifications
Dual air release vents the accumulated small volumes of air during normal system operation.
Allows inflow of large volumes of air during draining of the pipeline.
Allows venting of large volumes of air during filling of the pipeline.
Provides protection from pipeline collapse due to vacuum.
Flange and drilling to ANSI B16.1 Class125.(Other flange types available upon request)
Rated Working Pressure 300 psi.
.UL Listed.
WEFLO Angle Fire Pump Relief Valve FL x FL Ends F1329
Specifications:
Flanged to EN 1092-2 PN16,ANSI Class125/150/250.
(Other available on request)
Opens quickly: maintains pressure within close limits.
Wide range adjustable:65psi-300psi(4.5 bar -21 bar).
Pilot operated main valve.
Reduced cavitation design.
Simple field adjustable pressure setting, requiring no special tools or system down time.
Closes gradually for surge-free operation.
UL 1478 Listed and FM 1361 Approved.
*Limits maximum pump discharge pressure.
*Factory tested & preset to requirements.
Applicable forwater, foam.
300psi(21bar)high Working Pressure
600psi(42bar)Hydrostatic Test
Fusion Bonded Epoxy Coated Interior and Exterior toAWWA C550 Standard.
WEFLO Adjustable Relief Valve FIG.F1329
General Description
F1329 bronze adjustable relief valve is rated for up to 310 psi. The adjustable relief valve allows for the required NFPA field hydrostatic testing to be accomplished without removing and/or plugging the outlet for the relief valve. Note: Visual calibration lines on valve are used for approximate adjustment, must verify pressure setting with pressure gauge.
WEFLO Pressure Reducing Valve FIG.F1321-300
Specifications
Multiple End Types for Main Valve:
Flange by Flange, Flange by Groove, Groove by Groove. Pressure Relief Valve:
Limits pipe line pressure by release excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising to a maximum value.
Operates over a wide flow range.*Inlet pressure adjustment range: 65~180psi.Can be maintained without removal from the pipe line.
Flanged to EN1092-2 PN10/PN16,ANSI B16.1 Class125(Other available on request)
Grooved ends to AWWA C606 Standard.
Rated Working Pressure: 300 psi.
Adjustment Range of Set Pressure: 65 to 180 psi.Fusion Bonded Epoxy Coated Interior and Exterior to AWWAC550 Standard.FM 1361 Approved.CNBOP Certified.
WEFLO Pressure Relief Valve FL x Gr Ends FIG.F1319
Specifications:
Relief Valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents pipe line pressure from rising to a maximum valve.
Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range:65-300psi.
Quick opening and adjustable closing speed. Flanged to EN 1092-2 PN16,ANSlClass125/150/250.(Other available on request)
e Grooved Ends to AWWA C606 Standard.
*Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
WEFLO Pressure Relief Valve Gr x Gr Ends FIG.F1319
Specifications
Relief Valve: Limits inlet pressure by relieving excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising to a maximum valve.
Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range: 65-300psi.
Quick opening and adjustable closing speed.
*Grooved Ends to AWWA C606 Standard.
Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
Reviews
There are no reviews yet.