NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y (1)
Click to enlarge
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y (1)
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Stainless Steel Trim-FIG No-T-590-Y-66
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Stainless Steel Trim-FIG No-T-590-Y-66
Back to products
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y-66
NIBCO Three-Piece Bronze Ball Valve - Conventional Port, Solder Ends-FIG No-S-590-Y-66

NIBCO Three-Piece Bronze Ball Valve – Conventional Port, Solder Ends-FIG No-S-590-Y

  • Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
  • Maximum temperature rating 400°F
  • Conventional port
  • Chrome plated brass ball, silicon bronze stem
  • Blowout-proof stem
  • Standard lever handle, optional NIB-SEAL®
  • Solder end connections
  • Dezincification resistant
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Conforms to MSS SP-110
Description

FIG No-S-590-Y

The NIBCO® bronze ball valve features solder end connections for easy installation. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled water. May be used for isolation and throttling (half open to full open only). The valve is repairable in-line.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO Three-Piece Bronze Ball Valve – Conventional Port, Solder Ends-FIG No-S-590-Y”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Angle-Fire-Pump-Relief-Valve-FL-x-Gr-Ends-F1329.jpg

WEFLO Angle Fire Pump Relief Valve FL x Gr Ends F1329

Specifications: Flanged to EN 1092-2 PN16,ANSIClass125/150/250 (Other available on request) Grooved Ends to AWWA C606 Standard. Opens quickly; maintains pressure within close limits. Wide range adjustable: 65psi-300psi(4.5 bar-21 bar). Pilot operated main valve. Reduced cavitation design. Simple field adjustable pressure setting, requiring no special tools or system down time. Closes gradually for surge-free operation. UL1478 Listed and FM 1361 Approved. Limits maximum pump discharge pressure. Factory tested & preset to requirements. Applicable forwater. foam. 300psi(21bar)high Working Pressure 600psi(42bar)Hydrostatic Test Fusion Bonded Epoxy Coated Interior and Exterior toAWWAC550 Standard.
Read more
Swing-Check-Valve-Flanged-Ends-FIGF1322.jpg

WEFLO Swing Check Valve, Flanged Ends FIG.F1322

Specifications Meet or exceed the requirements of AWWA C508 Standard. Full Waterway. Disc is fully encapsulated with EPDM rubber. Superior design featuring exceptionally low pressure losses at high flow rates. Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts. Face to face dimensions according to ASME B16.10.Flanged to ASME B16.1 Class 125,EN 1092-2 PN16.Other flange types are available on request. Rated Working Pressure: 350 psi. UL/ULC Listed and FM Approved. ANSI/NSF61&372 Certified.
Read more
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199-2.jpg
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199.jpg

WEFLO OS&Y Resilient Seated Gate Valve,Flanged Ends & Grooved Ends FIG.F0199

Specifications: Adjustable Packing. Ductile-Iron Wedge, EPDM Encapsulated. Face to Face Dimensions to ANSI/ASME B16.10,EN558,Series 3. Flanges can be drilled toANSlB16.1 Class 125,ASME B16.42Class 150,AS 2129 Table E. Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWAC606 Standard. UL/ULC Listed/FM Approved @ 300 psi rating 3C Certified.
Read more
Double-Orifice-Air-Relief-Valve-FIG9106.jpg
Double-Orifice-Air-Relief-Valve-FIG9106-2.jpg

WEFLO Double Orifice Air Relief Valve FIG.9106

Specifications Dual air release vents the accumulated small volumes of air during normal system operation. Allows inflow of large volumes of air during draining of the pipeline. Allows venting of large volumes of air during filling of the pipeline. Provides protection from pipeline collapse due to vacuum. Flange and drilling to ANSI B16.1 Class125.(Other flange types available upon request) Rated Working Pressure 300 psi. .UL Listed.
Read more
Wafer-Butterfly-Valve-Gear-Operated-F0811-300-CNPP.jpg
Wafer-Butterfly-Valve-Gear-Operated-F0811-300-CNPP-2.jpg

WEFLO Wafer Butterfly Valve Gear Operated F0811-300 CNPP

Specifications: Meet or exceed the requirements of EN 593 and MSS SP-67 Standard. Single Piece Through Shaft. Splined Drive. e Outdoor and Indoor rated. Vulcanized Seat Design for Bubble-Tight Shutoff. Flag Type Position indicator. e Built-in Supervisory Switch. Face to Face Dimension complies with ASME B16.10 Narrow and EN558 Series 20. Connected Flange complies with ASME B16.5 Class 150 andEN1092 PN10/16.(Other Flange Types available upon request)®CNPP Certified. Rated Working Pressure 300 psi.
Read more
Angle-Fire-Pump-Relief-Valve-Gr-x-Gr-Ends-FIGF1339.jpg

WEFLO Angle Fire Pump Relief Valve Gr x Gr Ends FIG.F1339

Specifications :
  • Grooved Ends to AWWA C606 Standard.
  • Opens quickly: maintains pressure within close limits.
  • Wide range adjustable: 65psi-300psi(4.5 bar-21 bar).
  • Pilot operated main valve.
  • Reduced cavitation design.
  • Limits maximum pump discharge pressure.
  • Factory tested & preset to requirements.
  • Applicable for water, sea water & foam.
  • 300psi(21bar)high Working Pressure 600psi (42bar) Hydrostatic Test
  • Simple field adjustable pressure setting, requiring no special tools or system down time.
  • Closes gradually for surge-free operation.
  • UL 1478 Listed and FM  1361  Approved.
Read more
NRS-Resilient-Seated-Gate-Valve-Flanged-Ends-Grooved-Ends-FIGF0299-2.jpg
NRS-Resilient-Seated-Gate-Valve-Flanged-Ends-Grooved-Ends-FIGF0299.jpg

WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299

Specifications: Ductile-Iron Wedge, EPDM Encapsulated. Triple O-Ring Stem Seal. Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3. Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard. UL/ULC Listed/FM Approved @ 300 psi rating 3C Certified.
Read more
Air-Release-Valve-FIG9701.jpg

WEFLO Air Release Valve FIG.9701

Specifications Small orifice releases air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure. Rated Working Pressure 300 psi. UL Listed, FM 1344 Approved.
Read more