FIG No-739
The NIBCO® cast bronze solder pressure return bend is used in residential and commercial plumbing applications.
NIBCO Return Bend – Closed C x C – Cast-FIG No-739
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- ASTM B584 Alloy C84400
- Material and workmanship per ASME B16.18
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Basket Strainer, Flanged Ends FIG.F1411-250
Specification :
- Meet or exceed the requirements of UL 321 standard.
- 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
- Rated Working Pressure 250 psi.
- UL321/ULC listed.
NIBCO 45° Elbow C x C – Wrot-FIG No-606
- Lead-free
- Dezincification resistant
- ASTM B75 Alloy C12200
- NSF/ANSI/CAN-61 and 372
- Material and workmanship per ASME B16.22
- Material, workmanship and dimensions per MSS SP-104
- Material, workmanship and dimensions per MSS SP-109 (5" to 8")
- NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
- UL 207 Recognized to 700 PSI (select diameters)
WEFLO Y-Type Strainer, Grooved Ends, FIG.F0522-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assures accurate screen alignment Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Grooved Connections are cut in accordance with AWWA C 606 or other standard Groove Specifications for Steel Pipe.
- Rated Working Pressure 175 psi.
- UL 321 / ULC Listed.
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
WEFLO Pressure Gauges
Material Specifications :
- Bourdon Tube Material: Copper Alloy C-type
- Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
- Movement Copper Alloy
- Dial White Aluminum with Stop Pin; Black and Red Lettering.
- Pointer ABS, Black Finish
- Case Black Polycarbonate
- Window Snap-in Clear Polycarbonate
- Approvals UL Listed (UL-393) FM Approved
- Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
Reviews
There are no reviews yet.