NIBCO One-Piece Carbon Steel Ball Valve - Reduced Port, Locking Lever Handle-FIG No-T-560-CS-R-25-LL
Click to enlarge
NIBCO One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim-FIG No-T-560-CS-R-66-LL
NIBCO One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim-FIG No-T-560-CS-R-66-LL
Back to products
NIBCO One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim-FIG No-T-570-CS-R-66
NIBCO One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim-FIG No-T-570-CS-R-66

NIBCO One-Piece Carbon Steel Ball Valve – Reduced Port, Locking Lever Handle-FIG No-T-560-CS-R-25-LL

  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
  • Maximum temperature rating 400°F
  • Reduced port
  • Blowout-proof stem
  • Stainless steel ball and carbon steel stem
  • Vented ball
  • Threaded end connections
  • Standard lever handle or locking lever
  • Conforms to MSS SP-110
Description

FIG No-T-560-CS-R-25-LL

The NIBCO® carbon steel ball valve provides bubble-tight shutoff at 2000 PSI. The one-piece valve may be used on hot/cold water, HVAC, and is recommended for process piping, some chemical and utility service applications. This valve features a standard locking lever handle for security purposes. It may be used for isolation and throttling (half open to full open only). Also available with oval handle.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO One-Piece Carbon Steel Ball Valve – Reduced Port, Locking Lever Handle-FIG No-T-560-CS-R-25-LL”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Pressure-Relief-Valve-Gr-x-Gr-FIGF1349.jpg

WEFLO Pressure Relief Valve Gr x Gr FIG.F1349

Specifications: 
  • Relief Valve: Limits inlet pressure by relieving excess pressure.
  • Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
  • Operates over a Wide Flow Range.
  • Inlet Pressure Adjustment Range:65~300psi.
  • Quick opening and adjustable closing speed.
  • Grooved Ends to AWWA C606 Standard.
  • Rated Working Pressure 300 psi.
  • UL1478 Listed and FM 1361 Approved.
Read more
Double-Interlocked-Pre-Action-Valve-FIG5311.jpg

WEFLO Double Interlocked Pre-Action Valve FIG.5311

Pressure Rating : The Rated Pressure: 300 psi. The Maximum Air Supply Pressure: 30psi.
Read more
Angle-Fire-Pump-Relief-Valve-FL-x-FL-Ends-FIGF1339.jpg

WEFLO Angle Fire Pump Relief Valve FL x FL Ends FIG.F1339

Specifications :
  • Flanged to EN 1092-3 PN 16, ANSI Class 150/300. (Other available on request)
  • Opens quickly: maintains pressure within close limits.
  • Wide range adjustable: 65 psi-300 psi (4.5 bar - 21 bar).
  • Pilot operated main valve.
  • Reduced cavitation design.
  • Simple field adjustable pressure setting, requiring no special tools or system down time.
  • Limits maximum pump discharge pressure.
  • Factory tested &  preset to requirements.
  • Applicable for water, sea water & foam.
  • 300psi (21bar) high Working Pressure 600 psi (42bar) Hydrostatic Test
  • Closes gradually for surge-free operation.
  • UL 1478 Listed and FM 1361 Approved.
Read more
Sing-Orifice-Air-Relief-Valve-FIG9105.jpg
Sing-Orifice-Air-Relief-Valve-FIG9105-2.jpg

WEFLO Sing Orifice Air Relief Valve FIG.9105

Specifications: Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features within one valve, More compact and economical. Flange and drilling to A N S I B16. 1 Class125(Other flange types available upon request) e Rated Working Pressure 300 psi. UL Listed.
Read more
Pressure-Reducing-Valve-FLxFL-Ends-FIGF1318.jpg

WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318

Specifications : Reducing Valve: Reduces a higher inlet pressure to a lower out. let pressure. Constant Outlet Pressure over Wide Flow Range. Pilot-operated main valve not subject to pressure fall off.. Outlet Pressure is adjustable with single screw. Adjustable Opening/Response Speed. Stabilized regulation at near-zero flow. Flanged Ends to EN1092-2PN16,ANSI Class125/150/250. (Other available on request) UL1739 listed. 3C Certified. Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
Read more
Double-Orifice-Air-Relief-Valve-FIG9106.jpg
Double-Orifice-Air-Relief-Valve-FIG9106-2.jpg

WEFLO Double Orifice Air Relief Valve FIG.9106

Specifications Dual air release vents the accumulated small volumes of air during normal system operation. Allows inflow of large volumes of air during draining of the pipeline. Allows venting of large volumes of air during filling of the pipeline. Provides protection from pipeline collapse due to vacuum. Flange and drilling to ANSI B16.1 Class125.(Other flange types available upon request) Rated Working Pressure 300 psi. .UL Listed.
Read more
Pressure-Reducing-Valve-FIGF1321-300.jpg
Pressure-Reducing-Valve-FIGF1321-300-2.jpg

WEFLO Pressure Reducing Valve FIG.F1321-300

Specifications Multiple End Types for Main Valve: Flange by Flange, Flange by Groove, Groove by Groove. Pressure Relief Valve: Limits pipe line pressure by release excess pressure. Pressure sustaining: Prevents pipe line pressure from rising to a maximum value. Operates over a wide flow range.*Inlet pressure adjustment range: 65~180psi.Can be maintained without removal from the pipe line. Flanged to EN1092-2 PN10/PN16,ANSI B16.1 Class125(Other available on request) Grooved ends to AWWA C606 Standard. Rated Working Pressure: 300 psi. Adjustment Range of Set Pressure: 65 to 180 psi.Fusion Bonded Epoxy Coated Interior and Exterior to AWWAC550 Standard.FM 1361 Approved.CNBOP Certified.
Read more
Air-Release-Valve-FIG9701.jpg

WEFLO Air Release Valve FIG.9701

Specifications Small orifice releases air under pressure during normal pipeline operation. The float is connected to the vent via a linkage mechanism which is capable of operating the vent under full pipeline pressure. Rated Working Pressure 300 psi. UL Listed, FM 1344 Approved.
Read more