NIBCO One-Piece Bronze Ball Valve - PTFE Seat, Bronze Trim-FIG No-T-560-BR-Y-20
Click to enlarge
NIBCO Mini Ball Valve - Lead-Free Bronze-FIG No-NPR50A-LF
NIBCO Mini Ball Valve - Lead-Free Bronze-FIG No-NPR50A-LF
Back to products
One-Piece Bronze Ball Valve - PTFE Seat, Stainless Steel Trim-FIG No-T-560-BR-Y-66
One-Piece Bronze Ball Valve - PTFE Seat, Stainless Steel Trim-FIG No-T-560-BR-Y-66

NIBCO One-Piece Bronze Ball Valve – PTFE Seat, Bronze Trim-FIG No-T-560-BR-Y-20

  • Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
  • Maximum temperature rating 400°F
  • Blowout-proof stem
  • Brass ball and silicon bronze stem
  • Standard lever handle
  • Threaded end connections
  • Dezincification resistant
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Conforms to MSS SP-110
Description

FIG No-T-560-BR-Y-20

The NIBCO® reduced port bronze ball valve with PTFE seat provides bubble-tight shutoff at 600 PSI. The PTFE seat ring and brass ball exhibit high chemical resistance properties and is recommended for process piping. The one-piece valve is recommended for hot/cold water, HVAC, some chemical and utility service applications. The valve may be used for isolation and throttling (half open to full open only).

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO One-Piece Bronze Ball Valve – PTFE Seat, Bronze Trim-FIG No-T-560-BR-Y-20”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Angle-Fire-Pump-Relief-Valve-FL-x-Gr-Ends-FIGF1339.jpg

WEFLO Angle Fire Pump Relief Valve FL x Gr Ends FIG.F1339

Specifications :
  • Flanged to EN 1092-3 PN16. ANSI Class 150/300. (Other available on request)
  • Grooved Ends to AWWA C606 Standard.
  • Opens quickly: maintains pressure within close limits.
  • Wide range adjustable : 65psi-300psi (4.5 bar-21 bar).
  • Limits maximum pump discharge pressure.
  • Factory tested & preset to requirements.
  • Applicable for water. sea water & foam.
  • 300psi (21bar) high Working Pressure 600psi (42bar) Hydrostatic Test
  • Pilot operated main valve.
  • Reduced cavitation design.
  • Simple field adjustable pressure setting, requiring no special tools or system down time.
  • Closes gradually for surge-free operation.
  • UL 1478 Listed and FM 1361 Approved.
Read more
Angle-Fire-Pump-Relief-Valve-FL-x-Gr-Ends-F1329.jpg

WEFLO Angle Fire Pump Relief Valve FL x Gr Ends F1329

Specifications: Flanged to EN 1092-2 PN16,ANSIClass125/150/250 (Other available on request) Grooved Ends to AWWA C606 Standard. Opens quickly; maintains pressure within close limits. Wide range adjustable: 65psi-300psi(4.5 bar-21 bar). Pilot operated main valve. Reduced cavitation design. Simple field adjustable pressure setting, requiring no special tools or system down time. Closes gradually for surge-free operation. UL1478 Listed and FM 1361 Approved. Limits maximum pump discharge pressure. Factory tested & preset to requirements. Applicable forwater. foam. 300psi(21bar)high Working Pressure 600psi(42bar)Hydrostatic Test Fusion Bonded Epoxy Coated Interior and Exterior toAWWAC550 Standard.
Read more
Pressure-Reducing-Valve-FIGF1321-300.jpg
Pressure-Reducing-Valve-FIGF1321-300-2.jpg

WEFLO Pressure Reducing Valve FIG.F1321-300

Specifications Multiple End Types for Main Valve: Flange by Flange, Flange by Groove, Groove by Groove. Pressure Relief Valve: Limits pipe line pressure by release excess pressure. Pressure sustaining: Prevents pipe line pressure from rising to a maximum value. Operates over a wide flow range.*Inlet pressure adjustment range: 65~180psi.Can be maintained without removal from the pipe line. Flanged to EN1092-2 PN10/PN16,ANSI B16.1 Class125(Other available on request) Grooved ends to AWWA C606 Standard. Rated Working Pressure: 300 psi. Adjustment Range of Set Pressure: 65 to 180 psi.Fusion Bonded Epoxy Coated Interior and Exterior to AWWAC550 Standard.FM 1361 Approved.CNBOP Certified.
Read more
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199-2.jpg
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199.jpg

WEFLO OS&Y Resilient Seated Gate Valve,Flanged Ends & Grooved Ends FIG.F0199

Specifications: Adjustable Packing. Ductile-Iron Wedge, EPDM Encapsulated. Face to Face Dimensions to ANSI/ASME B16.10,EN558,Series 3. Flanges can be drilled toANSlB16.1 Class 125,ASME B16.42Class 150,AS 2129 Table E. Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWAC606 Standard. UL/ULC Listed/FM Approved @ 300 psi rating 3C Certified.
Read more
Adjustable-Relief-Valve-FIGF1329.jpg

WEFLO Adjustable Relief Valve FIG.F1329

General Description F1329 bronze adjustable relief valve is rated for up to 310 psi. The adjustable relief valve allows for the required NFPA field hydrostatic testing to be accomplished without removing and/or plugging the outlet for the relief valve. Note: Visual calibration lines on valve are used for approximate adjustment, must verify pressure setting with pressure gauge.
Read more
C515-NRS-Resilient-Seated-Gate-Valve-14-24-FIGF1211-300.jpg

WEFLO C515 NRS Resilient Seated Gate Valve 14“-24” FIG.F1211-300

Specifications : Multiple End TypesF1211-300:Flange by FlangeF0213-300:Flange by MJF0233-300:MJ by MJ Meet or exceed the requirements of AWWA C515 Standard. Full Waterway. Triple O-Ring Stem Seal. Ductile-Iron Wedge, EPDM Encapsulated. Operated with handwheel or operating nut. Flanged to ASME B16.1 Class 125. Other Flange Types available upon request. Mechanical Joint Outlets comply withANSIAWWAC153/A21.53Rated Working Pressure: 300 psi. UL/ULC Listed and FM Approved.
Read more
Swing-Check-Valve-Flanged-Ends-FIGF1322.jpg

WEFLO Swing Check Valve, Flanged Ends FIG.F1322

Specifications Meet or exceed the requirements of AWWA C508 Standard. Full Waterway. Disc is fully encapsulated with EPDM rubber. Superior design featuring exceptionally low pressure losses at high flow rates. Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts. Face to face dimensions according to ASME B16.10.Flanged to ASME B16.1 Class 125,EN 1092-2 PN16.Other flange types are available on request. Rated Working Pressure: 350 psi. UL/ULC Listed and FM Approved. ANSI/NSF61&372 Certified.
Read more
Pressure-Relief-Valve-Gr-x-Gr-FIGF1349.jpg

WEFLO Pressure Relief Valve Gr x Gr FIG.F1349

Specifications: 
  • Relief Valve: Limits inlet pressure by relieving excess pressure.
  • Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
  • Operates over a Wide Flow Range.
  • Inlet Pressure Adjustment Range:65~300psi.
  • Quick opening and adjustable closing speed.
  • Grooved Ends to AWWA C606 Standard.
  • Rated Working Pressure 300 psi.
  • UL1478 Listed and FM 1361 Approved.
Read more