NIBCO Globe Valve - Bronze, Bronze Trim, Threaded Ends-FIG No- T-211-B
Click to enlarge
NIBCO Globe Valve - Bronze, 200 PSI, Non-Rising Stem-FIG No-PF-211-Y
NIBCO Globe Valve - Bronze, 200 PSI, Non-Rising Stem-FIG No-PF-211-Y
Back to products
NIBCO Globe Valve - Bronze, Class 150, PTFE Disc-FIG No-T-235-Y
NIBCO Globe Valve - Bronze, Class 150, PTFE Disc-FIG No-T-235-Y

NIBCO Globe Valve – Bronze, Bronze Trim, Threaded Ends-FIG No- T-211-B

  • 125 psi/8.6 bar saturated steam to 366°F/178°C
  • 200 psi/13.8 bar non-shock cold working pressure
  • Integral seat
  • Screw-in bonnet
  • Renewable bronze seat disc
  • Class 125 threaded end connections
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Dezincification resistant
  • Conforms to MSS SP-80
Description

FIG No- T-211-B

The NIBCO® bronze globe valve features a screw in bonnet with integral seat. The valve has a renewable bronze seat disc. It is equipped with Class 125 female threaded ends for ease of installation. The globe valve is used for throttling or regulating flow.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO Globe Valve – Bronze, Bronze Trim, Threaded Ends-FIG No- T-211-B”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Sing-Orifice-Air-Relief-Valve-FIG9105.jpg
Sing-Orifice-Air-Relief-Valve-FIG9105-2.jpg

WEFLO Sing Orifice Air Relief Valve FIG.9105

Specifications: Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features within one valve, More compact and economical. Flange and drilling to A N S I B16. 1 Class125(Other flange types available upon request) e Rated Working Pressure 300 psi. UL Listed.
Read more
Double-Interlocked-Pre-Action-Valve-FIG5311.jpg

WEFLO Double Interlocked Pre-Action Valve FIG.5311

Pressure Rating : The Rated Pressure: 300 psi. The Maximum Air Supply Pressure: 30psi.
Read more
Adjustable-Relief-Valve-FIGF1329.jpg

WEFLO Adjustable Relief Valve FIG.F1329

General Description F1329 bronze adjustable relief valve is rated for up to 310 psi. The adjustable relief valve allows for the required NFPA field hydrostatic testing to be accomplished without removing and/or plugging the outlet for the relief valve. Note: Visual calibration lines on valve are used for approximate adjustment, must verify pressure setting with pressure gauge.
Read more
Angle-Fire-Pump-Relief-Valve-FL-x-Gr-Ends-F1329.jpg

WEFLO Angle Fire Pump Relief Valve FL x Gr Ends F1329

Specifications: Flanged to EN 1092-2 PN16,ANSIClass125/150/250 (Other available on request) Grooved Ends to AWWA C606 Standard. Opens quickly; maintains pressure within close limits. Wide range adjustable: 65psi-300psi(4.5 bar-21 bar). Pilot operated main valve. Reduced cavitation design. Simple field adjustable pressure setting, requiring no special tools or system down time. Closes gradually for surge-free operation. UL1478 Listed and FM 1361 Approved. Limits maximum pump discharge pressure. Factory tested & preset to requirements. Applicable forwater. foam. 300psi(21bar)high Working Pressure 600psi(42bar)Hydrostatic Test Fusion Bonded Epoxy Coated Interior and Exterior toAWWAC550 Standard.
Read more
NRS-Resilient-Seated-Gate-Valve-Flanged-Ends-Grooved-Ends-FIGF0299-2.jpg
NRS-Resilient-Seated-Gate-Valve-Flanged-Ends-Grooved-Ends-FIGF0299.jpg

WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299

Specifications: Ductile-Iron Wedge, EPDM Encapsulated. Triple O-Ring Stem Seal. Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3. Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard. UL/ULC Listed/FM Approved @ 300 psi rating 3C Certified.
Read more
Pressure-Relief-Valve-FL-x-FL-Ends-FIGF1319.jpg

WEFLO Pressure Relief Valve FL x FL Ends-FIG.F1319

Specifications: Relief Valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve. *Operates over a Wide Flow Range. *Inlet Pressure Adjustment Range: 65-300psi. Quick opening and adjustable closing speed. Flanged to EN 1092-2 PN16,ANSIClass125/150/250. (Other available on request)Rated Working Pressure 300 psi. UL 1478 Listed and FM 1361 Approved.
Read more
Pressure-Relief-Valve-Gr-x-Gr-FIGF1349.jpg

WEFLO Pressure Relief Valve Gr x Gr FIG.F1349

Specifications: 
  • Relief Valve: Limits inlet pressure by relieving excess pressure.
  • Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
  • Operates over a Wide Flow Range.
  • Inlet Pressure Adjustment Range:65~300psi.
  • Quick opening and adjustable closing speed.
  • Grooved Ends to AWWA C606 Standard.
  • Rated Working Pressure 300 psi.
  • UL1478 Listed and FM 1361 Approved.
Read more
Angle-Fire-Pump-Relief-Valve-FL-x-FL-Ends-FIGF1339.jpg

WEFLO Angle Fire Pump Relief Valve FL x FL Ends FIG.F1339

Specifications :
  • Flanged to EN 1092-3 PN 16, ANSI Class 150/300. (Other available on request)
  • Opens quickly: maintains pressure within close limits.
  • Wide range adjustable: 65 psi-300 psi (4.5 bar - 21 bar).
  • Pilot operated main valve.
  • Reduced cavitation design.
  • Simple field adjustable pressure setting, requiring no special tools or system down time.
  • Limits maximum pump discharge pressure.
  • Factory tested &  preset to requirements.
  • Applicable for water, sea water & foam.
  • 300psi (21bar) high Working Pressure 600 psi (42bar) Hydrostatic Test
  • Closes gradually for surge-free operation.
  • UL 1478 Listed and FM 1361 Approved.
Read more