FIG No-S-29
The NIBCO® bronze gate valve features a screw-in bonnet for a durable, pressure-tight seal. The non-rising stem gate valve with the aluminum handwheel offers positive shutoff. Solder ends allow for ease of installation.
NIBCO Gate Valve – Bronze, Full Port, Compact Design, Solder Ends-FIG No-S-29
- Valve pressure rating 200 psi/14 bar non-shock cold working pressure
- Solid wedge
- Screw-in bonnet
- Solder end connections
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Pressure Relief Valve Gr x Gr FIG.F1349
Specifications:
- Relief Valve: Limits inlet pressure by relieving excess pressure.
- Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
- Operates over a Wide Flow Range.
- Inlet Pressure Adjustment Range:65~300psi.
- Quick opening and adjustable closing speed.
- Grooved Ends to AWWA C606 Standard.
- Rated Working Pressure 300 psi.
- UL1478 Listed and FM 1361 Approved.
WEFLO Angle Fire Pump Relief Valve Gr x Gr Ends FIG.F1339
Specifications :
- Grooved Ends to AWWA C606 Standard.
- Opens quickly: maintains pressure within close limits.
- Wide range adjustable: 65psi-300psi(4.5 bar-21 bar).
- Pilot operated main valve.
- Reduced cavitation design.
- Limits maximum pump discharge pressure.
- Factory tested & preset to requirements.
- Applicable for water, sea water & foam.
- 300psi(21bar)high Working Pressure 600psi (42bar) Hydrostatic Test
- Simple field adjustable pressure setting, requiring no special tools or system down time.
- Closes gradually for surge-free operation.
- UL 1478 Listed and FM 1361 Approved.
WEFLO OS&Y Resilient Seated Gate Valve,Flanged Ends & Grooved Ends FIG.F0199
Specifications:
Adjustable Packing.
Ductile-Iron Wedge, EPDM Encapsulated.
Face to Face Dimensions to ANSI/ASME B16.10,EN558,Series 3.
Flanges can be drilled toANSlB16.1 Class 125,ASME B16.42Class 150,AS 2129 Table E.
Flat Faced Standard, Raised Face Upon Request.
Grooved Ends to AWWAC606 Standard.
UL/ULC Listed/FM Approved @ 300 psi rating
3C Certified.
WEFLO Adjustable Relief Valve FIG.F1329
General Description
F1329 bronze adjustable relief valve is rated for up to 310 psi. The adjustable relief valve allows for the required NFPA field hydrostatic testing to be accomplished without removing and/or plugging the outlet for the relief valve. Note: Visual calibration lines on valve are used for approximate adjustment, must verify pressure setting with pressure gauge.
WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318
Specifications :
Reducing Valve: Reduces a higher inlet pressure to a lower out.
let pressure.
Constant Outlet Pressure over Wide Flow Range.
Pilot-operated main valve not subject to pressure fall off..
Outlet Pressure is adjustable with single screw.
Adjustable Opening/Response Speed.
Stabilized regulation at near-zero flow.
Flanged Ends to EN1092-2PN16,ANSI Class125/150/250.
(Other available on request)
UL1739 listed.
3C Certified.
Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
WEFLO Grooved Butterfly Valve. Gear operated- F1022-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Vulcanized Disc Design for Bubble-Tight Shutoff.
Outdoor and Indoor rated.
Flag Type Position Indicator.
Built-in Supervisory Switch.
Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.
Face to Face Dimension complies with MSS SP-67
CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO Pressure Reducing Valve FIG.F1321-300
Specifications
Multiple End Types for Main Valve:
Flange by Flange, Flange by Groove, Groove by Groove. Pressure Relief Valve:
Limits pipe line pressure by release excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising to a maximum value.
Operates over a wide flow range.*Inlet pressure adjustment range: 65~180psi.Can be maintained without removal from the pipe line.
Flanged to EN1092-2 PN10/PN16,ANSI B16.1 Class125(Other available on request)
Grooved ends to AWWA C606 Standard.
Rated Working Pressure: 300 psi.
Adjustment Range of Set Pressure: 65 to 180 psi.Fusion Bonded Epoxy Coated Interior and Exterior to AWWAC550 Standard.FM 1361 Approved.CNBOP Certified.
Reviews
There are no reviews yet.