NIBCO FKM Socket Union S x S - PVC Schedule 80-FIG No-4533
Click to enlarge
NIBCO FKM Socket Union S x S - Kynar® Red PVDF Schedule 80-FIG No-6533
NIBCO FKM Socket Union S x S - Kynar® Red PVDF Schedule 80-FIG No-6533
Back to products
NIBCO FKM Threaded Union FPT x FPT - Corzan® CPVC Schedule 80-FIG No-5133-3-3
NIBCO FKM Threaded Union FPT x FPT - Corzan® CPVC Schedule 80-FIG No-5133-3-3

NIBCO FKM Socket Union S x S – PVC Schedule 80-FIG No-4533

  • Maximum service temperature 140°F
  • Universal Part No. 857
  • Female socket connections
  • Do not use or test with compressed air or other gases
  • ASTM F1970
  • NSF/ANSI Standard 14
  • NSF/ANSI/CAN-61
Description

FIG No-4533

The Chemtrol® socket union is an injection molded PVC Schedule 80 thermoplastic fitting for use with chemical processing, industrial plating, chilled water distribution, deionized water lines, chemical drainage and waste water treatment systems.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO FKM Socket Union S x S – PVC Schedule 80-FIG No-4533”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Single-Sphere-Rubber-Expansion-Joint-Fig8101.jpg
Single-Sphere-Rubber-Expansion-Joint-Fig8101-2.jpg

WEFLO Single Sphere Rubber Expansion Joint Fig. 8101

,

Specifications :

  • With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
  • High working pressure, anti-burst and good elasticity.
  • To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
  • Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
  • EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
  • NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
  • Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
  • Certificated to ANSI / NSF 61 &  372.
Read more
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8701.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8701-2.jpg

WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701

,

Specifications :

  • With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
  • High working pressure, anti-burst and good elasticity.
  • To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
  • Malleable iron fittings with Zinc plated, NPT or  BSPT thread.
  • EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable  oils. Excellent resistance to sunlight. Good for high and low temperature applications.
  • NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids.
  • Not good for sunlight ageing, ozone and flame.
  • Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
Read more
NIBCO 45° Fitting Elbow Ftg x C - Wrot-FIG No-606-2

NIBCO 45° Fitting Elbow Ftg x C – Wrot-FIG No-606-2

  • Lead-free
  • Dezincification resistant
  • ASTM B75 Alloy C12200
  • NSF/ANSI/CAN-61 and 372
  • Material and workmanship per ASME B16.22
  • Material, workmanship and dimensions per MSS SP-104
  • NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
Read more
Y-Type-StrainerGrooved-Ends-FIGF0522-175.jpg

WEFLO Y-Type Strainer, Grooved Ends, FIG.F0522-175

,
Specification :
  • Meet or exceed the requirements of UL 321 Standard.
  • NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
  • Recessed seat in body assures accurate screen alignment Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Grooved Connections are cut in accordance with AWWA C 606 or other standard Groove Specifications for Steel Pipe.
  • Rated Working Pressure 175  psi.
  • UL  321 / ULC Listed.
Read more
Basket-Strainer-Flanged-Ends-FIGF1411-250.jpg

WEFLO Basket Strainer, Flanged Ends FIG.F1411-250

,
Specification :
  • Meet or exceed the requirements of UL 321 standard.
  • 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
  • Recessed seat in body assures accurate screen alignment.
  • Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
  • Rated Working Pressure 250 psi.
  • UL321/ULC listed.
Read more
Y-Type-StrainerFlanged-Ends-FIGF0511-175.jpg

WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175

,
Specification :
  • Meet or exceed the requirements of UL 321 Standard.
  • NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
  • Recessed seat in body assure accurate screen alignment
  • Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
  • Rated Working Pressure 175 psi.
  • UL321/ULC Listed.
Read more
Pressure-Gauges.jpg

WEFLO Pressure Gauges

,
Material Specifications :
  • Bourdon Tube Material: Copper Alloy C-type
  • Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
  • Movement Copper Alloy
  • Dial White Aluminum with Stop Pin; Black and Red Lettering.
  • Pointer ABS, Black Finish
  • Case Black Polycarbonate
  • Window Snap-in Clear Polycarbonate
  • Approvals UL Listed (UL-393) FM Approved
  • Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
Read more
NIBCO 45° Wye C x C x C - Cast-FIG No-749

NIBCO 45° Wye C x C x C – Cast-FIG No-749

  • Dezincification resistant
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • ASTM B584 Alloy C84400
  • Material and workmanship per ASME B16.18
Read more