FIG No-748
The NIBCO® cast bronze solder pressure 90-degree wye fitting is used in residential and commercial plumbing applications.
NIBCO 90° Wye C x C x C – Cast-FIG No-748
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- ASTM B584 Alloy C84400
- Material and workmanship per ASME B16.18
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Double Sphere Rubber Expansion Joint Fig.8102
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN 16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO Waste Cone FIG.8103
Specifications:
- Available for Onshore and Offshore Applications.
- Manufactured in Accordance with NFPA20 Requirements.
- Designed for use with UL/FM Approved Fire Pump Pressure Relief Valves.
- Flanges to A N S I Class 150/300, Other available on request.
- Ductile lron-ASTMA536-65.
- (2)2"316 SS Sight Glasses per Waste Cone.
- Single Body Casting(No Welding).
WEFLO Grooved Ends Y- Strainer FIG.7901
Specifications :
- NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Groove dimensions comply with Metric or AWWA C606 standard.
- Rated Working Pressure 16 bar/250 psi.
WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assure accurate screen alignment
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
- Rated Working Pressure 175 psi.
- UL321/ULC Listed.
WEFLO Y-Type Strainer, Grooved Ends, FIG.F0522-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assures accurate screen alignment Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Grooved Connections are cut in accordance with AWWA C 606 or other standard Groove Specifications for Steel Pipe.
- Rated Working Pressure 175 psi.
- UL 321 / ULC Listed.
Reviews
There are no reviews yet.