FIG No-4707-2
The NIBCO® CPVC-CTS 90-degree elbow is made of FlowGuard Gold® CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications.
NIBCO 90° Street Elbow Spg x Slip – CPVC-CTS-FIG No-4707-2
- Maximum service temperature 180°F
- Not for use with compressed air or other gases
- ASTM
- ASTM D
- NSF U.P. Certified
- NSF/ANSI
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO Grooved Ends Y- Strainer FIG.7901
Specifications :
- NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Groove dimensions comply with Metric or AWWA C606 standard.
- Rated Working Pressure 16 bar/250 psi.
NIBCO 45° Elbow C x C – Wrot-FIG No-606
- Lead-free
- Dezincification resistant
- ASTM B75 Alloy C12200
- NSF/ANSI/CAN-61 and 372
- Material and workmanship per ASME B16.22
- Material, workmanship and dimensions per MSS SP-104
- Material, workmanship and dimensions per MSS SP-109 (5" to 8")
- NFPA 99 Health Care Facilities Gas and Vacuum Systems and the Compressed Gas Association, Pamphlet G4.1 (medical gas)
- UL 207 Recognized to 700 PSI (select diameters)
WEFLO Double Sphere Rubber Expansion Joint Fig.8102
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN 16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
Reviews
There are no reviews yet.