The Chemtrol® True Union ball check valve stops the flow of media in one direction while allowing flow in the opposite direction, with minimum turbulence and chatter while maintaining pump prime. The valve’s injection molded PVC construction with EPDM O-ring is ideal for use in chemical processing, industrial plating, chilled water distribution, chemical drainage and irrigation systems.
Ball Check Valve – Socket, True Union, PVC Schedule 80, EPDM- S45BC-E
- Valve pressure rating 150 psi at 73°F water non-shock
- Maximum service temperature 140°F
- True Union design
- EPDM O-rings
- Socket end connections
- Do not use or test with compressed air or other gases
- ASTM F1970
- NSF/ANSI Standard 14
- NSF/ANSI/CAN-61
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO C509 OS&Y Resilient Seated Gate Valve,FL x PO Ends & PO x PO Ends FIG.F1711-300
Specifications :
Meet or exceed the requirements of AWWA C509 Standard.
Full Waterway.
Robust Design.
Adjustable Packing
Rubber Fully Encapsulated Ductile iron Wedge.
Handwheel-open left or open right.
Face to Face Dimension complies with ASME B16.10.Flange and Drilling comply with ASTM B16.1 Class 125Push-on Joints Outlet complies with ANS!/AWWAC110/A21.10 Standard.
Rated Working Pressure: 300 psi.
WEFLO Pressure Relief Valve Gr x Gr FIG.F1349
Specifications:
- Relief Valve: Limits inlet pressure by relieving excess pressure.
- Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
- Operates over a Wide Flow Range.
- Inlet Pressure Adjustment Range:65~300psi.
- Quick opening and adjustable closing speed.
- Grooved Ends to AWWA C606 Standard.
- Rated Working Pressure 300 psi.
- UL1478 Listed and FM 1361 Approved.
WEFLO Wafer Butterfly Valve Gear Operated F0811-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Single Piece Through Shaft.
Splined Drive.
e Outdoor and Indoor rated.
Vulcanized Seat Design for Bubble-Tight Shutoff.
Flag Type Position indicator.
e Built-in Supervisory Switch.
Face to Face Dimension complies with ASME B16.10 Narrow and EN558 Series 20.
Connected Flange complies with ASME B16.5 Class 150 andEN1092 PN10/16.(Other Flange Types available upon request)®CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299
Specifications:
Ductile-Iron Wedge, EPDM Encapsulated.
Triple O-Ring Stem Seal.
Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3.
Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard.
UL/ULC Listed/FM Approved @ 300 psi rating
3C Certified.
WEFLO Grooved Butterfly Valve. Gear operated- F1022-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Vulcanized Disc Design for Bubble-Tight Shutoff.
Outdoor and Indoor rated.
Flag Type Position Indicator.
Built-in Supervisory Switch.
Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.
Face to Face Dimension complies with MSS SP-67
CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318
Specifications :
Reducing Valve: Reduces a higher inlet pressure to a lower out.
let pressure.
Constant Outlet Pressure over Wide Flow Range.
Pilot-operated main valve not subject to pressure fall off..
Outlet Pressure is adjustable with single screw.
Adjustable Opening/Response Speed.
Stabilized regulation at near-zero flow.
Flanged Ends to EN1092-2PN16,ANSI Class125/150/250.
(Other available on request)
UL1739 listed.
3C Certified.
Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
WEFLO Pressure Relief Valve FL x FL FIG.F1349
Specifications:
- Relief Valve: Limits inlet pressure by relieving excess pressure.
- Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
- Operates over a Wide Flow Range.
- Inlet Pressure Adjustment Range:65~300psi.
- Quick opening and adjustable closing speed.
- Flanged to EN1092-3 PN16,ANS| Class150/300.(Other available on request)
- Rated Working Pressure 300 psi.
- UL1478 Listed and FM 1361Approved.
WEFLO Angle Fire Pump Relief Valve FL x FL Ends FIG.F1339
Specifications :
- Flanged to EN 1092-3 PN 16, ANSI Class 150/300. (Other available on request)
- Opens quickly: maintains pressure within close limits.
- Wide range adjustable: 65 psi-300 psi (4.5 bar - 21 bar).
- Pilot operated main valve.
- Reduced cavitation design.
- Simple field adjustable pressure setting, requiring no special tools or system down time.
- Limits maximum pump discharge pressure.
- Factory tested & preset to requirements.
- Applicable for water, sea water & foam.
- 300psi (21bar) high Working Pressure 600 psi (42bar) Hydrostatic Test
- Closes gradually for surge-free operation.
- UL 1478 Listed and FM 1361 Approved.
Reviews
There are no reviews yet.