Valve
Showing 13–24 of 920 results
NIBCO Ball Valve – Threaded, Compact Economy, PVC Schedule 80, FKM-FIG NO-T45CE-V
- Valve pressure rating 150 psi at 73°F water non-shock
- Maximum service temperature 113º at 112 psi
- Compact design
- FKM O-ring
- Do not use or test with compressed air or other gases
- Thread connection per ASME B1.20.1
- Blue handle with blue cap
- ASTM F1970
- NSF/ANSI Standard 14
- NSF/ANSI/CAN-61
- NSF/ANSI/CAN-372
NIBCO Three-Piece Bronze Ball Valve – Thread x Solder End Connection-FIG No-TS-595-Y
- Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
- Maximum temperature rating 400°F
- Full port
- Chrome plated brass ball, silicon bronze stem
- Blowout-proof stem
- Standard lever handle or locking lever, optional NIB-SEAL®
- Thread x solder end connections
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Conforms to MSS SP-110
NIBCO One-Piece Carbon Steel Ball Valve – Carbon Steel Trim-FIG No-T-570-CS-R-25
- Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (1/2" to 1")
- Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4" to 2")
- Maximum temperature rating 400°F
- Reduced port
- Blowout-proof stem
- Chrome plated carbon steel ball, carbon steel stem
- Vented ball
- Standard lever handle
- Threaded end connections
- Conforms to MSS SP-110
NIBCO Ball Valve – Brass, Two-Piece, Full Port, C x C-FIG NO-S-FP600A
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure (1/4" to 2")
- Valve pressure rating 400 psi/27.6 bar non-shock cold working pressure (2-1/2" to 4")
- Full port
- Chrome-plated brass ball and stem
- Blowout-proof stem
- Standard lever handle
- Female solder cup end connections
- Use in U.S. drinking water applications is prohibited after January 3, 2014
NIBCO Three-Piece Carbon Steel Ball Valve – Fire Safe, Threaded ISO Mount End-FIG No-TM-590-CS-R-66-FS-LL
- Valve pressure rating 2000 psi 138 bar non-shock cold working pressure
- Maximum temperature rating 400°F
- Conventional port
- Blowout-proof stem
- Enclosed bolt design
- Reinforced PTFE seats
- Stainless steel ball and stem
- Vented ball
- Locking lever handle
- Cast ISO mounting pad
- Threaded ISO mount end connections
- Conforms to MSS SP-110
- API-607 Fourth Edition Fire Safe
- API-608 Anti-Static
NIBCO Isolator Double Flanged Check-FIG No-H-1370
- Adds a Check Valve to Any Pump
- Installs Between the Pump and Isolator
- Operates in a Horizontal or Vertical Position
- Features One of the Largest Flow Rates Available Anywhere
- 360 Degree Rotating Flange is Secured by a Snug-Fit Snap-Ring That Provides Greater Control Over Positioning During Installation
- Saves Time
- Replaces Components
- Eliminates Leak Paths
- Available in FLG
- Certified to NSF/ANSI 61
WEFLO WAFER (LUG) TYPE KNIFE GATE VALVE WITH LEVER
FEATURES :
- Model 3328-Wafer type, Model 3528-Lug type.
- Ductile Iron or Stainless Steel Body.
- Uni-directional Wafer / Lug type Size Range: DN80 to DN200.
- The cutting edge of the gate is inclined, which acts as a guide in the body and reduces the reaction force.
- NBR or EPDM Resilient Seat reduces the Operating Force necessary to close the valve.
- Full flow when fully opened, ensuring a high flow rate with low head loss.
- Connection Flanged Ends : EN 1092-1 / 2, JISB2239 / 2220, AS 2129.
- Maximum Working Temperature : NBR : 80°C; EPDM:110°C.
- Maximum Working Pressure : DN 50-200:10 bar.
NIBCO Check Valve – Class 250, Iron Body, Buna-N Seat-FIG No-W-960-W
NIBCO Butterfly Valve – Cast Iron, International, Wafer, Bronze Disc-FIG NO-N200145
- Valve pressure rating 200 psi
- Maximum 180°F service
- Wafer style
- Buna-N cartridge seat liner
- Aluminum bronze disc
- Stainless steel stem with bronze bushings
- Extended neck
- Operating mechanism: Bare stem, lever-lock operating system, manual gear operator
- Not recommended for steam service
- Designed to meet MSS SP-67
- MSS SP-25 (markings)
- Designed to meet API 609
WEFLO Double Door Check Valve- FIG.F0411
Specifications:
Meet or exceed the requirements ofUL312 and AP|594Standard.
Spring Loaded for Fast Closure.
Vertical or Horizontal Installation. Resilient-seated for perfect tightness even at low differential pressure.
Excellent flow characteristics and low pressure losses at high flow rates.
Connection Ends comply with ASME B16.1 Class 125 and ASMEB16.5 Class 150 Flanges.
Rated Working PressureF0411-175:175 psiF0411:300 psi
UL312/ULC Listed.
CNBOP Certified forFlG.F0411-175.
