The NIBCO® lead-free* brass ball valve with solder end connections includes a drain. The valve’s PTFE seats and lead-free ball exhibit high corrosion resistance properties. The valve is ideal for hot/cold water applications.
NIBCO Ball Valve Lead-Free Brass Two-Piece Full Port with Drain-FIG NO-S-FP600-AD-LF
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
- Full port
- PTFE seat
- Blowout-proof stem
- Drain port and cap
- Standard lever handle
- Solder end connections
- IAPMO listed to NSF/ANSI-61-8, NSF/ANSI-372 and UPC-IGC-157
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Pressure Relief Valve FL x FL FIG.F1349
Specifications:
- Relief Valve: Limits inlet pressure by relieving excess pressure.
- Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
- Operates over a Wide Flow Range.
- Inlet Pressure Adjustment Range:65~300psi.
- Quick opening and adjustable closing speed.
- Flanged to EN1092-3 PN16,ANS| Class150/300.(Other available on request)
- Rated Working Pressure 300 psi.
- UL1478 Listed and FM 1361Approved.
WEFLO Angle Fire Pump Relief Valve FL x Gr Ends F1329
Specifications:
Flanged to EN 1092-2 PN16,ANSIClass125/150/250
(Other available on request)
Grooved Ends to AWWA C606 Standard.
Opens quickly; maintains pressure within close limits.
Wide range adjustable: 65psi-300psi(4.5 bar-21 bar).
Pilot operated main valve.
Reduced cavitation design. Simple field adjustable pressure setting, requiring no special tools or system down time. Closes gradually for surge-free operation.
UL1478 Listed and FM 1361 Approved.
Limits maximum pump discharge pressure.
Factory tested & preset to requirements.
Applicable forwater. foam.
300psi(21bar)high Working Pressure
600psi(42bar)Hydrostatic Test
Fusion Bonded Epoxy Coated Interior and Exterior toAWWAC550 Standard.
WEFLO Adjustable Relief Valve FIG.F1329
General Description
F1329 bronze adjustable relief valve is rated for up to 310 psi. The adjustable relief valve allows for the required NFPA field hydrostatic testing to be accomplished without removing and/or plugging the outlet for the relief valve. Note: Visual calibration lines on valve are used for approximate adjustment, must verify pressure setting with pressure gauge.
WEFLO C509 OS&Y Resilient Seated Gate Valve,FL x PO Ends & PO x PO Ends FIG.F1711-300
Specifications :
Meet or exceed the requirements of AWWA C509 Standard.
Full Waterway.
Robust Design.
Adjustable Packing
Rubber Fully Encapsulated Ductile iron Wedge.
Handwheel-open left or open right.
Face to Face Dimension complies with ASME B16.10.Flange and Drilling comply with ASTM B16.1 Class 125Push-on Joints Outlet complies with ANS!/AWWAC110/A21.10 Standard.
Rated Working Pressure: 300 psi.
WEFLO Grooved Butterfly Valve. Gear operated- F1022-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Vulcanized Disc Design for Bubble-Tight Shutoff.
Outdoor and Indoor rated.
Flag Type Position Indicator.
Built-in Supervisory Switch.
Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.
Face to Face Dimension complies with MSS SP-67
CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318
Specifications :
Reducing Valve: Reduces a higher inlet pressure to a lower out.
let pressure.
Constant Outlet Pressure over Wide Flow Range.
Pilot-operated main valve not subject to pressure fall off..
Outlet Pressure is adjustable with single screw.
Adjustable Opening/Response Speed.
Stabilized regulation at near-zero flow.
Flanged Ends to EN1092-2PN16,ANSI Class125/150/250.
(Other available on request)
UL1739 listed.
3C Certified.
Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
WEFLO Pressure Relief Valve FL x FL Ends-FIG.F1319
Specifications:
Relief Valve: Limits inlet pressure by relieving excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
*Operates over a Wide Flow Range.
*Inlet Pressure Adjustment Range: 65-300psi.
Quick opening and adjustable closing speed.
Flanged to EN 1092-2 PN16,ANSIClass125/150/250.
(Other available on request)Rated Working Pressure 300 psi.
UL 1478 Listed and FM 1361 Approved.
Reviews
There are no reviews yet.