FIG No-4733-7-LF
The NIBCO® CPVC-CTS union is made of FlowGuard Gold® CPVC and is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications.
NIBCO Union CPVC Slip x Copper Silicon Alloy Compression – Lead-Free CPVC-CTS-FIG No-4733-7-LF
- Maximum service temperature 180°F
- Not for use with compressed air or other gases
- Lead-free
- Certified by IAPMO Research and Testing
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO H-Strainer Fig.7120
Specifications :
- Large Flow Area, Low Pressure Drop.
- Service without removal from line.
- Can be installed in any position, spec installation with cover up is recommended.
- Flanged and Drilling comply with EN1092-2 PN16. Other flange types are available upon request.
- Rated Working Pressure 200 psi/16 bar.
WEFLO Double Sphere Rubber Expansion Joint Fig.8102
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN 16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
WEFLO Pressure Gauges
Material Specifications :
- Bourdon Tube Material: Copper Alloy C-type
- Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
- Movement Copper Alloy
- Dial White Aluminum with Stop Pin; Black and Red Lettering.
- Pointer ABS, Black Finish
- Case Black Polycarbonate
- Window Snap-in Clear Polycarbonate
- Approvals UL Listed (UL-393) FM Approved
- Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
WEFLO Basket Strainer, Flanged Ends FIG.F1411-250
Specification :
- Meet or exceed the requirements of UL 321 standard.
- 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
- Rated Working Pressure 250 psi.
- UL321/ULC listed.
WEFLO Grooved Ends Y- Strainer FIG.7901
Specifications :
- NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Groove dimensions comply with Metric or AWWA C606 standard.
- Rated Working Pressure 16 bar/250 psi.
Reviews
There are no reviews yet.