FIG No-4818-SCRN
The NIBCO® PVC Termination Vent Screen can be installed into high-efficiency appliance vent lines with a push or interference fit.
NIBCO PVC Termination Vent Screen-FIG No-4818-SCRN
- Stainless steel screen with 1/4″ mesh opening
- Interference fit with ABS or PVC DWV sockets
- Not intended or certified for roof vents
- Remove during freezing temperatures
- Do not install with solvent cement or glue
- Maximum service temperature 140°F
- Do not test or use with compressed air or other gases
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Malleable iron fittings with Zinc plated, NPT or BSPT thread.
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids.
- Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
WEFLO Double Sphere Rubber Expansion Joint Fig.8102
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN 16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
WEFLO Pressure Gauges
Material Specifications :
- Bourdon Tube Material: Copper Alloy C-type
- Pressure Connection Material: Copper Alloy1/4"NPT Lower Mount(LM)
- Movement Copper Alloy
- Dial White Aluminum with Stop Pin; Black and Red Lettering.
- Pointer ABS, Black Finish
- Case Black Polycarbonate
- Window Snap-in Clear Polycarbonate
- Approvals UL Listed (UL-393) FM Approved
- Temperature Err or Additional error when temperature changes from reference temperature of68°F(20°C)+0.4% for every18°F(10°C)rising or falling (Percentage of Span).
WEFLO Y-Type Strainer, Grooved Ends, FIG.F0522-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assures accurate screen alignment Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Grooved Connections are cut in accordance with AWWA C 606 or other standard Groove Specifications for Steel Pipe.
- Rated Working Pressure 175 psi.
- UL 321 / ULC Listed.
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO Y-Strainer FIG.7101 – 7102
Specifications :
- NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Flanged and drilling complies with EN 1092-2 PN16 / 25, ANSI B 16. 1 Class 125.
- Rated Working Pressure Fig. 7101:16 bar / 200 psi for DN 50 to DN 600 ,Fig. 7102:25 bar / 300 psi for DN50 to DN 300
- WRAS Approved: Fig.7101 DN50-DN 600 Dl body, EPDM Gasket for potable water.
- ANSI/ NSF61 & 372 Certificated: Fig: 7101: DN 50-DN 2000.
- For larger than DN600 product data, contact the supplier.
Reviews
There are no reviews yet.