FIG No-4616-4
The NIBCO® PVC Schedule 40 plug features a male NPT threaded connection to fit inside a fitting to seal the end of a pipeline or a location where future additions may be made to the piping system.
NIBCO Plug MIPT – PVC Schedule 40-FIG No-4616-4
- Maximum service temperature 140°F
- Do not test or use with compressed air or other gases
- ASTM D2466
- ASTM D1784, cell Class 12454
- NSF/ANSI/CAN-61
- UL Listed 94V-0
- NSF U.P. Certified
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Grooved Ends Y- Strainer FIG.7901
Specifications :
- NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Groove dimensions comply with Metric or AWWA C606 standard.
- Rated Working Pressure 16 bar/250 psi.
WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assure accurate screen alignment
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
- Rated Working Pressure 175 psi.
- UL321/ULC Listed.
WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
WEFLO H-Strainer Fig.7120
Specifications :
- Large Flow Area, Low Pressure Drop.
- Service without removal from line.
- Can be installed in any position, spec installation with cover up is recommended.
- Flanged and Drilling comply with EN1092-2 PN16. Other flange types are available upon request.
- Rated Working Pressure 200 psi/16 bar.
WEFLO Basket Strainer, Flanged Ends FIG.F1411-250
Specification :
- Meet or exceed the requirements of UL 321 standard.
- 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
- Rated Working Pressure 250 psi.
- UL321/ULC listed.
Reviews
There are no reviews yet.