FIG No-4807-2-V
The NIBCO® PVC DWV 90-degree street vent elbow is used in residential and commercial drain, waste and vent systems.
NIBCO 90° Street Vent Elbow Spg x H – PVC DWV-FIG No-4807-2-V
- Maximum service temperature 140°F
- Do not test or use with compressed air or other gases
- ASTM D2665 and D3311
- NSF/ANSI Standard 14
- UL Listed 94V-0
- NSF U.P. Certified
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Automatic Sprinklers
Specifications:
Style: Pendent, Upright, Sidewall
Minimum Operating Pressure: 7 psi(0.5 bar)Maximum
Working Pressure:175 psi(12 bar)
Factory tested hydrostatically to 500 psi(34.5 bar)
Thread Size: ½" NPT, 15 mm BSPT
Nominal K-Factor: 5.6 U.S.(80.6 metric*)
Overall Length: 2-3/8”(60 mm)
Finish : Brass, Chrome Plated and White Polyester Available
Metric K-factor measurement shown is in Bar.
When pressure is measured in kPa.
divide the metric K-factor shown by 10.0.
WEFLO H-Strainer Fig.7120
Specifications :
- Large Flow Area, Low Pressure Drop.
- Service without removal from line.
- Can be installed in any position, spec installation with cover up is recommended.
- Flanged and Drilling comply with EN1092-2 PN16. Other flange types are available upon request.
- Rated Working Pressure 200 psi/16 bar.
WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assure accurate screen alignment
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
- Rated Working Pressure 175 psi.
- UL321/ULC Listed.
WEFLO Y-Strainer FIG.7103 – 7107
Specifications :
- BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
- Screens are perforated 304 stainless steel with spot welded seam.
- Recessed seat in body assures accurate screen alignment.
- Flanged and drilling complies with EN 1092-2 PN 16/25.
- Face to Face Dimension in accordance with DIN 3202 series F1.
- Rated Working Pressure Fig.7103: 16 bar for DN50 to DN600.Fig.7107: 25 bar for DN50 to DN300
WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701
Specifications :
- With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Malleable iron fittings with Zinc plated, NPT or BSPT thread.
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Excellent resistance to sunlight. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids.
- Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
Reviews
There are no reviews yet.