FIG No-4607-3-3
The NIBCO® PVC Schedule 40 90-degree elbow features female NPT threaded connections and is used to change the direction of flow.
NIBCO 90° Elbow FIPT x FIPT – PVC Schedule 40-FIG No-4607-3-3
- Maximum service temperature 140°F
- Do not test or use with compressed air or other gases
- ASTM D2466
- ASTM D1784, cell Class 12454
- NSF/ANSI/CAN-61
- UL Listed 94V-0
- NSF U.P. Certified
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO Single Sphere Rubber Expansion Joint Fig. 8101
Specifications :
- With single structure so that the vibration absorption is better and noise reduction efficiency is significant.
- High working pressure, anti-burst and good elasticity.
- To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
- Carbon steel flanges, Zinc plated to BS 4504 PN16 (Other flanges available).
- EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable oils. Good for high and low temperature applications.
- NBR is suitable for most hydrocarbons, good for high and hydraulic fluids. Not good for sunlight ageing, ozone and flame.
- Neoprene suitable for water, sewage, oxidant and non aromatic hydrocarbons. Good for oil resistance and weathering.
- Certificated to ANSI / NSF 61 & 372.
WEFLO Basket Strainer, Flanged Ends FIG.F1411-250
Specification :
- Meet or exceed the requirements of UL 321 standard.
- 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
- Rated Working Pressure 250 psi.
- UL321/ULC listed.
WEFLO Basket Strainer Flanged Ends, FIG.F1411-200
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- Recessed seat in body assures accurate screen alignment.
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- 3" and above sizes are with Lifting Eyebolt.
- Connection Ends: ASME B16.1 Class 125 or EN 1092-2PN10/16 (Other Flange Types Available Upon Request)
- Rated Working Pressure 200 psi.
- UL 321/ULC Listed.
WEFLO H-Strainer Fig.7120
Specifications :
- Large Flow Area, Low Pressure Drop.
- Service without removal from line.
- Can be installed in any position, spec installation with cover up is recommended.
- Flanged and Drilling comply with EN1092-2 PN16. Other flange types are available upon request.
- Rated Working Pressure 200 psi/16 bar.
WEFLO Waste Cone FIG.8103
Specifications:
- Available for Onshore and Offshore Applications.
- Manufactured in Accordance with NFPA20 Requirements.
- Designed for use with UL/FM Approved Fire Pump Pressure Relief Valves.
- Flanges to A N S I Class 150/300, Other available on request.
- Ductile lron-ASTMA536-65.
- (2)2"316 SS Sight Glasses per Waste Cone.
- Single Body Casting(No Welding).
WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175
Specification :
- Meet or exceed the requirements of UL 321 Standard.
- NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
- Recessed seat in body assure accurate screen alignment
- Round holes with 60 degrees staggered.
- Excellent flow characteristics and low pressure losses at high flow rates.
- Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
- Rated Working Pressure 175 psi.
- UL321/ULC Listed.
Reviews
There are no reviews yet.