NIBCO Union w Test Port - FPT Body x MPT Tailpiece-FIG No-TMT-1800
Click to enlarge
NIBCO Union P x P - Wrot Copper-FIG No-PC633
NIBCO Union P x P - Wrot Copper-FIG No-PC633
Back to products
NIBCO Union w Test Port - FPT Body X Press Tailpiece-FIG No-TPC-1800
NIBCO Union w Test Port - FPT Body X Press Tailpiece-FIG No-TPC-1800

NIBCO Union w/Test Port – FPT Body x MPT Tailpiece-FIG No-TMT-1800

  • 600 psi non-shock cold working pressure at 100°F
  • Maximum temperature rating 250°F at 200 psi
  • DZR Brass body and end connector
  • EPDM O-Ring
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • FLO-BOSS™ U
Description

FIG No-TMT-1800

The NIBCO® FLO-BOSS® Coil-Connect® Brass Union is specifically designed for use in HVAC systems. The Union acts as a service connection to allow for the installation and removal of equipment and components from the system. Each union is equipped with 1 PT port, 2 additional tapped ports are available for the additon of optional accessory items.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO Union w/Test Port – FPT Body x MPT Tailpiece-FIG No-TMT-1800”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Y-Type-StrainerFlanged-Ends-FIGF0511-175.jpg

WEFLO Y-Type Strainer, Flanged Ends, FIG.F0511-175

,
Specification :
  • Meet or exceed the requirements of UL 321 Standard.
  • NPT or BSPT blowoff outlet on cover (blowoff outlets are furnished with plugs).
  • Recessed seat in body assure accurate screen alignment
  • Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Connection Ends: ASME B16.1 Class 125 0r EN1092-2 PN10/16(Other Flange Types Available Upon Request)
  • Rated Working Pressure 175 psi.
  • UL321/ULC Listed.
Read more
NIBCO 45° Wye C x C x C - Cast-FIG No-749

NIBCO 45° Wye C x C x C – Cast-FIG No-749

  • Dezincification resistant
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • ASTM B584 Alloy C84400
  • Material and workmanship per ASME B16.18
Read more
Grooved-Ends-Y-Strianer-FIG7901.jpg

WEFLO Grooved Ends Y- Strainer FIG.7901

,

Specifications :

  • NPT or BSPT blowoff outlet on cover. Blowoff outlets are finished with plugs.
  • Screens are perforated 304 stainless steel with spot welded seam.
  • Recessed seat in body assures accurate screen alignment.
  • Groove dimensions comply with Metric or AWWA C606 standard.
  • Rated Working Pressure 16 bar/250 psi.
Read more
Basket-Strainer-Flanged-Ends-FIGF1411-250.jpg

WEFLO Basket Strainer, Flanged Ends FIG.F1411-250

,
Specification :
  • Meet or exceed the requirements of UL 321 standard.
  • 3" to 6" blowoff outlet on body bottom and 8" to 16"on side of body barrel of bottom.
  • Recessed seat in body assures accurate screen alignment.
  • Round holes with 60 degrees staggered.
  • Excellent flow characteristics and low pressure losses at high flow rates.
  • Flanges to ASME B 16. 1 Class125, EN 1092-2 PN 16. (Other flange types available upon request)
  • Rated Working Pressure 250 psi.
  • UL321/ULC listed.
Read more
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8702-2.jpg

WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8702

,
Specifications : With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant. High working
Read more
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8701.jpg
Double-Sphere-Union-Type-Rubber-Expansion-Joint-Fig8701-2.jpg

WEFLO Double Sphere Union Type Rubber Expansion Joint Fig.8701

,

Specifications :

  • With multi-sphere structure so that the vibration absorption is better and noise reduction efficiency is significant.
  • High working pressure, anti-burst and good elasticity.
  • To avoid damage caused by stretching, compressing, deflecting or displacing of pipes.
  • Malleable iron fittings with Zinc plated, NPT or  BSPT thread.
  • EPDM rubber suitable for hot water, steam, oxidant, animal and vegetable  oils. Excellent resistance to sunlight. Good for high and low temperature applications.
  • NBR is suitable for most hydrocarbons, oils, petroleum fuels and hydraulic fluids.
  • Not good for sunlight ageing, ozone and flame.
  • Neoprene suitable for water, sewage, oxidant and non-aromatic hydrocarbons.
Read more
Automatic-Sprinklers-3.jpg
Automatic-Sprinklers-2.jpg

WEFLO Automatic Sprinklers

,
Specifications: Style: Pendent, Upright, Sidewall Minimum Operating Pressure: 7 psi(0.5 bar)Maximum Working Pressure:175 psi(12 bar) Factory tested hydrostatically to 500 psi(34.5 bar) Thread Size: ½" NPT,  15 mm BSPT Nominal K-Factor: 5.6 U.S.(80.6 metric*) Overall Length: 2-3/8”(60 mm) Finish : Brass, Chrome Plated and White Polyester Available Metric K-factor measurement shown is in Bar. When pressure is measured in kPa. divide the metric K-factor shown by 10.0.
Read more
Waste-Cone-FIG8103.jpg
Waste-Cone-FIG8103-2.jpg

WEFLO Waste Cone FIG.8103

,
Specifications: 
  • Available for Onshore and Offshore Applications.
  • Manufactured in Accordance with NFPA20 Requirements.
  • Designed for use with UL/FM Approved Fire Pump Pressure Relief Valves.
  • Flanges to A N S I Class 150/300, Other available on request.
  • Ductile lron-ASTMA536-65.
  • (2)2"316 SS Sight Glasses per Waste Cone.
  • Single Body Casting(No Welding).
Read more