NIBCO Two-Piece Bronze Ball Valve - Full Port, Threaded-FIG No-T-585-70
Click to enlarge
NIBCO Two-Piece Bronze Ball Valve - Full Port, Solder End Connections-FIG No-S-585-70
NIBCO Two-Piece Bronze Ball Valve - Full Port, Solder End Connections-FIG No-S-585-70
Back to products
NIBCO Two-Piece Bronze Ball Valve - Full Port, Threaded, Stainless Steel Handle and Nut-FIG No-T-585-70-SSHN
NIBCO Two-Piece Bronze Ball Valve - Full Port, Threaded, Stainless Steel Handle and Nut-FIG No-T-585-70-SSHN

NIBCO Two-Piece Bronze Ball Valve – Full Port, Threaded-FIG No-T-585-70

  • Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
  • Maximum temperature rating 400°F
  • Full port
  • Chrome plated brass ball, silicon bronze stem
  • Blowout-proof stem
  • Standard lever handle, optional NIB-SEAL®
  • Threaded end connections
  • Dezincification resistant
  • Use in U.S. drinking water applications is prohibited after January 3, 2014
  • Conforms to MSS SP-110
Description

FIG No-T-585-70

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. With the reinforced PTFE seat ring and brass hard chrome plated ball, the valve exhibits high chemical resistance properties. The two-piece valve is recommended for many high pressure applications, HVAC, hot and cold domestic water, low pressure steam, and compressed air.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NIBCO Two-Piece Bronze Ball Valve – Full Port, Threaded-FIG No-T-585-70”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

Swing-Check-Valve-Flanged-Ends-FIGF1322.jpg

WEFLO Swing Check Valve, Flanged Ends FIG.F1322

Specifications Meet or exceed the requirements of AWWA C508 Standard. Full Waterway. Disc is fully encapsulated with EPDM rubber. Superior design featuring exceptionally low pressure losses at high flow rates. Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts. Face to face dimensions according to ASME B16.10.Flanged to ASME B16.1 Class 125,EN 1092-2 PN16.Other flange types are available on request. Rated Working Pressure: 350 psi. UL/ULC Listed and FM Approved. ANSI/NSF61&372 Certified.
Read more
Double-Interlocked-Pre-Action-Valve-FIG5311.jpg

WEFLO Double Interlocked Pre-Action Valve FIG.5311

Pressure Rating : The Rated Pressure: 300 psi. The Maximum Air Supply Pressure: 30psi.
Read more
Sing-Orifice-Air-Relief-Valve-FIG9105.jpg
Sing-Orifice-Air-Relief-Valve-FIG9105-2.jpg

WEFLO Sing Orifice Air Relief Valve FIG.9105

Specifications: Provides the functions of both Air Release and Air / Vacuum Valves. Exhausts large quantities of air at system start-up. Provides protection from pipeline collapse due to vacuum. Incorporates both features within one valve, More compact and economical. Flange and drilling to A N S I B16. 1 Class125(Other flange types available upon request) e Rated Working Pressure 300 psi. UL Listed.
Read more
Pressure-Relief-Valve-FL-x-FL-FIGF1349.jpg

WEFLO Pressure Relief Valve FL x FL FIG.F1349

Specifications: 
  • Relief Valve: Limits inlet pressure by relieving excess pressure.
  • Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve.
  • Operates over a Wide Flow Range.
  • Inlet Pressure Adjustment Range:65~300psi.
  • Quick opening and adjustable closing speed.
  • Flanged to EN1092-3 PN16,ANS| Class150/300.(Other available on request)
  • Rated Working Pressure 300 psi.
  • UL1478 Listed and FM 1361Approved.
Read more
Pressure-Reducing-Valve-FLxFL-Ends-FIGF1318.jpg

WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318

Specifications : Reducing Valve: Reduces a higher inlet pressure to a lower out. let pressure. Constant Outlet Pressure over Wide Flow Range. Pilot-operated main valve not subject to pressure fall off.. Outlet Pressure is adjustable with single screw. Adjustable Opening/Response Speed. Stabilized regulation at near-zero flow. Flanged Ends to EN1092-2PN16,ANSI Class125/150/250. (Other available on request) UL1739 listed. 3C Certified. Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
Read more
Angle-Fire-Pump-Relief-Valve-Gr-x-Gr-Ends-FIGF1339.jpg

WEFLO Angle Fire Pump Relief Valve Gr x Gr Ends FIG.F1339

Specifications :
  • Grooved Ends to AWWA C606 Standard.
  • Opens quickly: maintains pressure within close limits.
  • Wide range adjustable: 65psi-300psi(4.5 bar-21 bar).
  • Pilot operated main valve.
  • Reduced cavitation design.
  • Limits maximum pump discharge pressure.
  • Factory tested & preset to requirements.
  • Applicable for water, sea water & foam.
  • 300psi(21bar)high Working Pressure 600psi (42bar) Hydrostatic Test
  • Simple field adjustable pressure setting, requiring no special tools or system down time.
  • Closes gradually for surge-free operation.
  • UL 1478 Listed and FM  1361  Approved.
Read more
Pressure-Relief-Valve-FL-x-FL-Ends-FIGF1319.jpg

WEFLO Pressure Relief Valve FL x FL Ends-FIG.F1319

Specifications: Relief Valve: Limits inlet pressure by relieving excess pressure. Pressure sustaining: Prevents pipe line pressure from rising toa maximum valve. *Operates over a Wide Flow Range. *Inlet Pressure Adjustment Range: 65-300psi. Quick opening and adjustable closing speed. Flanged to EN 1092-2 PN16,ANSIClass125/150/250. (Other available on request)Rated Working Pressure 300 psi. UL 1478 Listed and FM 1361 Approved.
Read more
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199-2.jpg
OSY-Resilient-Seated-Gate-ValveFlanged-Ends-Grooved-Ends-FIGF0199.jpg

WEFLO OS&Y Resilient Seated Gate Valve,Flanged Ends & Grooved Ends FIG.F0199

Specifications: Adjustable Packing. Ductile-Iron Wedge, EPDM Encapsulated. Face to Face Dimensions to ANSI/ASME B16.10,EN558,Series 3. Flanges can be drilled toANSlB16.1 Class 125,ASME B16.42Class 150,AS 2129 Table E. Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWAC606 Standard. UL/ULC Listed/FM Approved @ 300 psi rating 3C Certified.
Read more