FIG No-M-609-RWS
The NIBCO® resilient wedge ductile iron gate valve provides full flow with minimal pressure drop. The mechanical joint gate valve is designed to be the main control valve in an automatic fire sprinkler system.
NIBCO Gate Valve – Ductile Iron, Fire Protection, Mechanical Joint-FIG No-M-609-RWS
- 300 psi/20.7 bar non-shock cold working pressure
- Non-rising stem
- Bolted bonnet
- Resilient wedge
- Epoxy coated body inside and out per AWWA C-550 (coating NSF and FDA certified)
- Class 125 mechanical joint end connection
- Meets or exceeds performance requirements of AWWA C509 and C515 for 3″ and larger valves
- Listed by UL/ULC (UL262)
- FM Approved
Description
Reviews (0)
Shipping & Delivery
Related products
WEFLO NRS Resilient Seated Gate Valve Flanged Ends & Grooved Ends FIG.F0299
Specifications:
Ductile-Iron Wedge, EPDM Encapsulated.
Triple O-Ring Stem Seal.
Face to Face Dimensions to ANSI/ASME B16.10EN558,Series 3.
Flange Drilling toANSIB16.1,Class 125,ASME B16.42, Class 150Flat Faced Standard, Raised Face Upon Request. Grooved Ends to AWWA C606 Standard.
UL/ULC Listed/FM Approved @ 300 psi rating
3C Certified.
WEFLO Angle Fire Pump Relief Valve FL x Gr Ends F1329
Specifications:
Flanged to EN 1092-2 PN16,ANSIClass125/150/250
(Other available on request)
Grooved Ends to AWWA C606 Standard.
Opens quickly; maintains pressure within close limits.
Wide range adjustable: 65psi-300psi(4.5 bar-21 bar).
Pilot operated main valve.
Reduced cavitation design. Simple field adjustable pressure setting, requiring no special tools or system down time. Closes gradually for surge-free operation.
UL1478 Listed and FM 1361 Approved.
Limits maximum pump discharge pressure.
Factory tested & preset to requirements.
Applicable forwater. foam.
300psi(21bar)high Working Pressure
600psi(42bar)Hydrostatic Test
Fusion Bonded Epoxy Coated Interior and Exterior toAWWAC550 Standard.
WEFLO Grooved Butterfly Valve. Gear operated- F1022-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Vulcanized Disc Design for Bubble-Tight Shutoff.
Outdoor and Indoor rated.
Flag Type Position Indicator.
Built-in Supervisory Switch.
Grooved Ends Dimensions meet AWWA C606 Standard or other IPS Pipe.
Face to Face Dimension complies with MSS SP-67
CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO Pressure Reducing Valve FLxFL Ends FIG.F1318
Specifications :
Reducing Valve: Reduces a higher inlet pressure to a lower out.
let pressure.
Constant Outlet Pressure over Wide Flow Range.
Pilot-operated main valve not subject to pressure fall off..
Outlet Pressure is adjustable with single screw.
Adjustable Opening/Response Speed.
Stabilized regulation at near-zero flow.
Flanged Ends to EN1092-2PN16,ANSI Class125/150/250.
(Other available on request)
UL1739 listed.
3C Certified.
Enamel Paint or Fusion Bonded Epoxy Coated Interior and Exterior.
WEFLO C515 OS& amp Y Resilient Seated Gate Valve 14“-24” FIG.F1111-300
Specifications :
Multiple End Types
F1111-300:Flange by FlangeF0113-300:Flange by MJF0133-300:MJby MJ
Meet or exceed the requirements ofAWWAC515 Standard.
Full Waterway.
Adjustable Packing.
Ductile-Iron Wedge, EPDM Encapsulated.
Flanged to ASME B16.1 Class 125.OtherFlangeTypes available upon request. Mechanical Joint Outlets comply with ANSI/AWWAC153/A21.53Rated Working Pressure: 300 psi. UL/ULC Listed and FM Approved,
WEFLO Wafer Butterfly Valve Gear Operated F0811-300 CNPP
Specifications:
Meet or exceed the requirements of EN 593 and MSS SP-67 Standard.
Single Piece Through Shaft.
Splined Drive.
e Outdoor and Indoor rated.
Vulcanized Seat Design for Bubble-Tight Shutoff.
Flag Type Position indicator.
e Built-in Supervisory Switch.
Face to Face Dimension complies with ASME B16.10 Narrow and EN558 Series 20.
Connected Flange complies with ASME B16.5 Class 150 andEN1092 PN10/16.(Other Flange Types available upon request)®CNPP Certified.
Rated Working Pressure 300 psi.
WEFLO Pressure Reducing Valve FIG.F1321-300
Specifications
Multiple End Types for Main Valve:
Flange by Flange, Flange by Groove, Groove by Groove. Pressure Relief Valve:
Limits pipe line pressure by release excess pressure.
Pressure sustaining: Prevents pipe line pressure from rising to a maximum value.
Operates over a wide flow range.*Inlet pressure adjustment range: 65~180psi.Can be maintained without removal from the pipe line.
Flanged to EN1092-2 PN10/PN16,ANSI B16.1 Class125(Other available on request)
Grooved ends to AWWA C606 Standard.
Rated Working Pressure: 300 psi.
Adjustment Range of Set Pressure: 65 to 180 psi.Fusion Bonded Epoxy Coated Interior and Exterior to AWWAC550 Standard.FM 1361 Approved.CNBOP Certified.
Reviews
There are no reviews yet.